Ultrafine fibrous cellulose membranes from electrospinning of cellulose acetate

By Haiqing Liu, Y. Hsieh. 2002

654 citations recorded by the source corpus.

Subfields: Biomaterials, Biomedical Engineering

View Paper: https://www.semanticscholar.org/paper/d60354bb5438178907ab3b9ea9a86bd5d462090c

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Biomaterials

In Biomedical Engineering

Citations in the corpus

Electrospinning Cellulose and Cellulose Derivatives (2008, background): “The water absorbance of electrospun cellulose nanofiber mats that had been deacetylated to cellulose was significantly greater than conventional cellulose fabrics.(24,26) The absorbence of chemicals into the fabrics increased with both the decreasing pore size which increased capillary action and th”
Effect of polymer concentration on the morphology and mechanical characteristics of electrospun cellulose acetate and poly (vinyl chloride) nanofiber mats (2016, result): “The average diameter of electrospun smooth fibers was found to be above 100 nm for CA in Acetone–DMAc which is consistent with what has been previously reported [22] (see Table 3).”
Electrospinning of polymer nanofibers: Effects on oriented morphology, structures and tensile properties (2010, neutral): “Recently, it was determined that the nature of the collector influences significantly the morphological and the physical characteristics of the spun fibers [38,39].”
Electrospinning of Polymeric Nanofibers for Tissue Engineering Applications: A Review (2006, positive): “36 Also, porous collectors, such as paper and copper mesh, produced a less-packed structure as compared to fibers collected on aluminum foil and water.”
A Review on Biopolymer-Based Fibers via Electrospinning and Solution Blowing and Their Applications (2018, methodology): “, (2002) [112], cellulose acetate was electrospun into continuous nanofibers using acetone and DMAc solvent mixture (2:1).”
Electrospinning: a fascinating fiber fabrication technique. (2010, background): “…the shape of the beads changes from spherical to spindle-like and finally uniform fibers with increased diameters are formed because of the higher viscosity resistance (Deitzel et al., 2001; Liu and Hsieh, 2002; Ryu et al., 2003; McKee et al., 2004; Ki et al., 2005; Haghi and Akbari, 2007).”
Nanotechnology and its applications in lignocellulosic composites, a mini review (2007, background): “Once ejected out of metal spinnerets with a small hole, the charged solution jets evaporated to become fibers which were collected on the collector [89].”
Electrospun poly lactic acid (PLA) fibres: Effect of different solvent systems on fibre morphology and diameter (2014, background): “It has been reported [24,30] that there are four different concentration regimes for polymer dissolved in a good solvent:”
A Review: Electrospinning of Biopolymer Nanofibers and their Applications (2008, methodology): “Based on the inconsistent fiber morphology previously reported, Liu and Hsieh (2002)125 investigated using acetone, acetic acid (AA), and dimethylacetamide as the solvent since cellulose acetate only dissolves in liquids with a Hildebrand solubility parameter between 9.5 and 12.5 (cal/cm3)1/2.”