3D printing of optimized composites with variable fiber volume fraction and stiffness using continuous fiber

By Kentaro Sugiyama, Ryosuke Matsuzaki, A. Malakhov, A. Polilov, M. Ueda, A. Todoroki, Y. Hirano. 2020

184 citations recorded by the source corpus.

Abstract In this study, we optimized the curved fiber trajectories to realize variable fiber volume fraction and stiffness composites (VVfSC) using a continuous fiber composite 3D printer. During optimization, the fiber orientation was maintained along the principal stress direction based on preliminary stress field calculations, and the fiber trajectories were subsequently obtained. The fiber volume fraction was calculated from the obtained fiber trajectories; then, stress field calculations and redetermination of the fiber trajectories were performed. Optimization was achieved by repeating this sequence until convergence was obtained. Based on the optimization result, the specimens were molded using a continuous carbon fiber 3D printer and evaluated with bolt joint tensile tests. It was demonstrated that the stiffness and strength per unit weight of the optimized VVfSC were 9.4 and 1.6 times greater than those of conventional linear laminates, respectively.

Subfields: Automotive Engineering, Building and Construction, Industrial and Manufacturing Engineering

View Paper: https://www.semanticscholar.org/paper/d5e294824d92c4c429e6aeccb9aa931bfb39bb37

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Automotive Engineering

  1. Peng Zhuo
  2. Shuguang Li
  3. Ian Ashcroft
  4. Arthur Jones

In Building and Construction

  1. Peng Zhuo
  2. Shuguang Li
  3. Ian Ashcroft
  4. Arthur Jones

In Industrial and Manufacturing Engineering

  1. Peng Zhuo
  2. Shuguang Li
  3. Ian Ashcroft
  4. Arthur Jones

Citations in the corpus