Corrosion of Steel in Concrete
By Luca Bertolini, B. Elsener, P. Pedeferri, E. Redaelli, R. Polder. 2013
1,262 citations recorded by the source corpus.
Subfields: Civil and Structural Engineering, Materials Chemistry, Pollution
View Paper: https://www.semanticscholar.org/paper/d56232dc9a7ae9830260a0e049ff34d6bb9e5d65
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Civil and Structural Engineering
- Fabrizio Moro
- Emilio Bastidas-Arteaga
- Mauricio Sánchez-Silva
- Zuhua Zhang
- Ph. Bressolette
- Liang Shi
- Li Yan
- Y. Zheng
In Materials Chemistry
In Pollution
Citations in the corpus
- Non-destructive methods for measuring chloride ingress into concrete: State-of-the-art and future challenges (2014, positive): “Regarding the difficulty of distinguishing between free and bound chlorides, some researchers consider that this threshold value must be related the total chloride content [73, 74].”
- Carbonation of concrete: the role of CO2 concentration, relative humidity and CO2 buffer capacity (2016, positive): “12 (B) corresponds approximately to the square root of the quotient of the CO2 concentrations used in the accelerated tests agreeing with other studies [1, 12].”
- Corrosion resistance of steel fibre reinforced concrete – a literature review (2018, positive): “Following Tuutti’s model for corrosion of reinforced concrete [100], the deterioration of SFRC due to carbonation can be divided into: a) initiation phase, where CO2 dissolves into the pore solution, reacts with calcium hydroxide and progressively lowers the pH at the steel surface; b) propagation p”
- A comprehensive probabilistic model of chloride ingress in unsaturated concrete (2011, positive): “However, under various assumptions, this phenomenon can be simplified to a diffusion problem [1].”
- The effect of the steel–concrete interface on chloride-induced corrosion initiation in concrete: a critical review by RILEM TC 262-SCI (2019, neutral): “K. Tuutti (1982) Corrosion of steel in concrete.”
- Phosphate ions as corrosion inhibitors for reinforcement steel in chloride-rich environments (2013, neutral): “As long as the integrity of this passive film is guaranteed, the corrosion rate will be minimal [1].”
- Chloride-Induced Corrosion of Steel in Concrete: An Overview on Chloride Diffusion and Prediction of Corrosion Initiation Time (2017, positive): “The effects of chloride binding and multidirectional chloride ingress on chloride diffusion coefficient are also reported [9, 11, 12].”
- Challenges and opportunities in corrosion of steel in concrete (2018, positive): “Over the last 60 years considerable research efforts have been made to determine the value and/or the distribution of C crit , as reviewed in Ref.”
- Corrosion of steel bars embedded in fibre reinforced concrete under chloride attack: State of the art (2016, neutral): “Nevertheless, the term ”coefficient of permeability” will be used instead of the more accurate term ”coefficient of permeation”, as this is common practice [3].”
- Nondestructive test methods for concrete bridges: A review (2016, neutral): “Apparatus of half-cell and varies from 10(1) to 10(6)Xm [100,101].”
- Impact of carbonation on unsaturated water transport properties of cement-based materials (2015, neutral): “514 References 515 [1] K. Tuutti, Corrosion of steel in concrete, Swedish Cement and Concrete Research Institute, 1982, 516 pp. 468.”
- The Durability of Alkali-Activated Materials in Comparison with Ordinary Portland Cements and Concretes: A Review (2020, positive): “is combined in the cement hydration products by means of chemical/physical binding [128].”