Turbulence Over Urban-type Roughness: Deductions from Wind-tunnel Measurements
By I. Castro, Hong Cheng, R. Reynolds. 2006
238 citations recorded by the source corpus.
Subfields: Computational Mechanics, Environmental Engineering, Global and Planetary Change
View Paper: https://www.semanticscholar.org/paper/d3b5e50db5c8501c2edc7e0b1d4e86f6a427f5d5
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Computational Mechanics
In Environmental Engineering
In Global and Planetary Change
Citations in the corpus
- LES and RANS for Turbulent Flow over Arrays of Wall-Mounted Obstacles (2006, unknown): “more than one decade) inertial sub-range with slope −5/3 was found on the spectrum obtained from measurements [7, 24] at low Reynolds”
- Numerical Investigations of Mean Winds Within Canopies of Regularly Arrayed Cubical Buildings Under Neutral Stability Conditions (2009, result): “In Fig. 2a–f, the vertical profiles of the mean streamwise velocities u and the Reynolds shear stresses −u � w � of ST25a and ST25b at the four points indicated in Fig. 1b are compared with those of the wind-tunnel measurements of Castro et al. (2006) .”
- Efficient Generation of Inflow Conditions for Large Eddy Simulation of Street-Scale Flows (2008, methodology): “The turbulence profiles were chosen to approximate the horizontally averaged measurements obtained by (Castro et al., 2006).”
- Large-Eddy Simulation of Flows over Random Urban-like Obstacles (2008, background): “All the data fall into a very small area in the vicinity of the origin, which is more or less the same as found for flow over the uniform array by Castro et al. (2006), but differs significantly from near-surface data in smooth-wall boundary layers or within the two-dimensional canopy region formed…”
- Structure of turbulent flow over regular arrays of cubical roughness (2007, methodology): “Hence, the published measurements of Cheng & Castro (2002) and Castro et al. (2006), which were performed at Re = 12 000, are suitable for comparing with the results of the present simulations, which are performed at a Reynolds number of 5800.”