Influence of Ionomer Content in IrO 2 /TiO 2 Electrodes on PEM Water Electrolyser Performance
By M. Bernt, H. Gasteiger. 2016
330 citations recorded by the source corpus.
In this study, the influence of ionomer content in IrO2/TiO2 anode electrodes for a proton exchange membrane (PEM) electrolyzer is investigated (Nafion 212 membrane; 2.0 mgIr cm−2 / 0.35 mgPt cm−2 (anode/cathode)) and the contributions of ohmic losses, kinetic losses, proton transport losses in the electrodes, and mass transport losses to the overall cell voltage are analyzed. Electrolysis tests are performed with an in-house designed high pressure electrolyzer cell at differential pressure up to 30 bar. The best performance is obtained for an ionomer content of 11.6 wt% and a cell voltage of 1.57 V at 1 A cm−2 and less than 2 V at 6 A cm−2 (ambient pressure, 80°C). Performance losses at lower ionomer contents are the result of a higher proton conduction resistance. For higher ionomer contents, on the other hand, performance losses can be related to a filling of the electrode void volume by ionomer, leading to a higher O2 mass transport resistance, an increased electronic contact resistance, and the electronic insulation of parts of the catalyst by ionomer. At high pressure operation, the performance corrected by the shift of the Nernst voltage increases with H2 pressure and we propose a new explanation for this effect.
Subfields: Electrical and Electronic Engineering, Renewable Energy, Sustainability and the Environment
View Paper: https://www.semanticscholar.org/paper/d2a6e49ea77dabc0d715094ebd4466c22c361133
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Electrical and Electronic Engineering
In Renewable Energy, Sustainability and the Environment
Citations in the corpus
- Stability challenges of electrocatalytic oxygen evolution reaction: From mechanistic understanding to reactor design (2021, background): “Low ionomer content can lead to high ionic resistance, while an excess ionomer content can lead to electrode blocking and mass diffusion limitations.(145,146) Thus, the amount of ionomer should be optimized under different catalysts and operation conditions.”