On the Design of Single-Layer Circuit Analog Absorber Using Double-Square-Loop Array

By Yuping Shang, Zhongxiang Shen, Shaoqiu Xiao. IEEE Transactions on Antennas and Propagation, 2013

402 citations recorded by the source corpus.

Subfields: Aerospace Engineering, Electronic, Optical and Magnetic Materials

View Paper: https://www.semanticscholar.org/paper/cc2b5e91722acb4bd3dc90be70c4bf3bf5057b50

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Aerospace Engineering

1. Hao Huang
2. Ahmed Omar
3. Zhi Ning Chen
4. Said F. Al-Sarawi
5. Zhi Hao Jiang
6. Derek Abbott
7. Yue Li
8. Ziheng Zhou

In Electronic, Optical and Magnetic Materials

1. Hao Huang
2. Ahmed Omar
3. Amir Ebrahimi
4. Derek Abbott
5. Zhi Ning Chen
6. Said F. Al-Sarawi
7. Akhilesh Mohan
8. Cheng-Wei Qiu

Citations in the corpus

• Broadband Polarization-Insensitive Tunable Frequency Selective Surface for Wideband Shielding (2018, neutral): “two-dimensional array in free space [33]–[35].”
• Absorptive Frequency-Selective Reflection and Transmission Structures (2017, methodology): “4(c) shows the photograph of the fabricated prototype in the measurement setup detailed in [24].”
• 3-D Frequency Selective Rasorber: Concept, Analysis, and Design (2016, neutral): “7(b), which is similar to the measurement setup described in [15].”
• Metantenna: When Metasurface Meets Antenna Again (2020, methodology): “Many design methods, such as analog analysis [109], capacitive circuit method [110], interference theory [111], antenna reciprocity theory [112], Lorentz model [113], and global optimizations [114], are proposed to expand bandwidth or to increase the number of bands.”
• Varactor-Tunable Second-Order Bandpass Frequency-Selective Surface With Embedded Bias Network (2016, background): “Since the TEM mode can be excited inside the parallel-plate waveguide in the frequency range of interest [50]–[52], only two varactors aligned with the E-field direction are soldered in each side of the unit cell.”
• Design of a Tunable Low-Frequency and Broadband Radar Absorber Based on Active Frequency Selective Surface (2016, background): “with lumped components like resistors and capacitors [5], [6]”
• Single-Layer Wideband Microwave Absorber Using Array of Crossed Dipoles (2016, background): “From the table, it is evident that our proposed absorber is compact as compared to [7], [8], [16], and [17], and thinner than [7]–[9], [17], and [18].”
• Absorptive Frequency-Selective Transmission Structure With Square-Loop Hybrid Resonator (2017, background): “The details of this measurement setup can be found in [14].”