Fused deposition modeling with polypropylene

By O. Carneiro, A. F. Silva, R. Gomes. 2015

798 citations recorded by the source corpus.

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

Fused Deposition Modelling of Fibre Reinforced Polymer Composites: A Parametric Review (2021, methodology): “[55] used a new printing procedure by printing only inner filling (infill structure d scribed in Section 2.”
Process–Structure–Properties in Polymer Additive Manufacturing via Material Extrusion: A Review (2020, background): “Due to this, higher layer thickness, which usually has lower cooling rate due to higher heat capacity of the extruded filament (due to higher mass of the extruded filament), usually associates to higher mechanical performance in across the layer direction (Figure 4(B)).(31) Interlayer cooling time i”
A comprehensive review of extrusion-based additive manufacturing processes for rapid production of metallic and ceramic parts (2019, background): “The increasing interest and technological advances in FDM allow producers to achieve superior dimensional control and properties of 3D printed objects [10].”
Surface Roughness Quality and Dimensional Accuracy—A Comprehensive Analysis of 100% Infill Printed Parts Fabricated by a Personal/Desktop Cost-Effective FDM 3D Printer (2018, background): “Fundamentally, FDM 3D technology is mainly based on the layer manufacturing process [14] and the fundamental principle is quite straightforward [15].”