Mechanical properties of additive manufactured titanium (Ti–6Al–4V) blocks deposited by a solid-state laser and wire

By E. Brandl, F. Palm, V. Michailov, B. Viehweger, C. Leyens. 2011

225 citations recorded by the source corpus.

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

Additive manufacturing of metals (2016, background): “The AA 2139 (AlCu,Mg) alloy was investigated by Brice et al. [85] in 24]), after ion-etching and examined by SEM in back scattering emission alloy contrast d equi-axed regions with a grain size of 100 nm e 1 mm and coarser regions 2e5 mm in epresent primary and secondary phases containing Fe and Mn;”
Laser cladding as repair technology for Ti–6Al–4V alloy: Influence of building strategy on microstructure and hardness (2015, background): “[24] show that when unexpected interstitial elements such as O, N or even C, which are present within the normal atmosphere go into solid solution inside the microstructure, both the tensile strength and the ductility collapse.”
Effects of hot isostatic pressing on the elastic modulus and tensile properties of 316L parts made by powder bed laser fusion (2017, background): “Typically the material/process development cycle will start by studying the links between porosity and tensile strength, as exemplified for powder bed fusion processes, of which selective laser melting (SLM) generally referrers to processes specifically using optical based lasers, [7], wire-feed pro”