A ferroelectric semiconductor field-effect transistor

By Mengwei Si, A. Saha, Shengjie Gao, G. Qiu, J. Qin, Yuqin Duan, J. Jian, Chang Niu, Haiyan Wang, Wenzhuo Wu and 2 more. Nature Electronics, 2018

545 citations recorded by the source corpus.

Ferroelectric field-effect transistors employ a ferroelectric material as a gate insulator, the polarization state of which can be detected using the channel conductance of the device. As a result, the devices are potentially of use in non-volatile memory technology, but they suffer from short retention times, which limits their wider application. Here, we report a ferroelectric semiconductor field-effect transistor in which a two-dimensional ferroelectric semiconductor, indium selenide (α-In2Se3), is used as the channel material in the device. α-In2Se3 was chosen due to its appropriate bandgap, room-temperature ferroelectricity, ability to maintain ferroelectricity down to a few atomic layers and its potential for large-area growth. A passivation method based on the atomic layer deposition of aluminium oxide (Al2O3) was developed to protect and enhance the performance of the transistors. With 15-nm-thick hafnium oxide (HfO2) as a scaled gate dielectric, the resulting devices offer high performance with a large memory window, a high on/off ratio of over 108, a maximum on current of 862 μA μm−1 and a low supply voltage.A ferroelectric semiconductor field-effect transistor, which uses the two-dimensional ferroelectric semiconductor α-In2Se3 as a channel material, could offer enhanced capabilities compared with conventional ferroelectric field-effect transistors in non-volatile memory applications.

Subfields: Electrical and Electronic Engineering, Electronic, Optical and Magnetic Materials, Materials Chemistry

View Paper: https://www.semanticscholar.org/paper/bdda263d5f488f20a0b697633e05618e0319669c