Preparation and characterization of activated carbons obtained from the waste materials impregnated with phosphoric acid(V)

By Magdalena Zięzio, B. Charmas, K. Jedynak, M. Hawryluk, K. Kucio. Applied Nanoscience, 2020

144 citations recorded by the source corpus.

In the paper spent coffee grounds were used as a precursor to obtain activated carbons. The raw material was impregnated with phosphoric acid(V) at the different impregnations ratios: 0.5, 1, 1.5, 2. Carbonization was carried out according to two procedures differing in activation atmosphere (N2 or CO2). The obtained activated carbons were characterized on the basis of low-temperature nitrogen adsorption/desorption, thermal analysis, potentiometric titration method, X-ray diffraction, Raman spectroscopy and scanning electron microscopy. Carbons obtained according to procedure 2 (activation in CO2) were characterized by better developed porosity, e.g. surface (SBET to 720.9 m2/g) and pore volume (Vp to 0.334 cm3/g). All obtained carbons had surface acidic (mainly carboxyl) groups and exhibited the amorphous structure. The thermal analysis showed that the obtained materials were thermally stable up to the temperature ~ 420 °C.

Subfields: Electronic, Optical and Magnetic Materials, Materials Chemistry

View Paper: https://www.semanticscholar.org/paper/bc2026364bae2e41de4df3d173d644c65f8cb5d7