Toward energy harvesting using active materials and conversion improvement by nonlinear processing

By Daniel Guyomar, Adrien Badel, É. Lefeuvre, Claude Richard. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 2005

1,039 citations recorded by the source corpus.

Subfields: Biomedical Engineering, Civil and Structural Engineering, Mechanical Engineering

View Paper: https://www.semanticscholar.org/paper/b6f20b1f8356de6bf95534592dbfc60a4c820c8f

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Biomedical Engineering

In Civil and Structural Engineering

In Mechanical Engineering

Citations in the corpus

Energy harvesting from vibrations with a nonlinear oscillator (2010, neutral): “[12] to improve power output significantly.”
On thermoelectric and pyroelectric energy harvesting (2009, methodology): “* Piezoelectric method—active materials are employed to generate the energy when mechanically stressed [6].”
Array of piezoelectric energy harvesting by the equivalent impedance approach (2012, background): “In the above, qI = e − π 2QI and QI is the electrical quality factor introduced in the SSHI circuits for measuring the extent of energy loss from the inductor in series with the switch [10, 39].”
Fabrication of composite PVDF-ZnO nanofiber mats by electrospinning for energy scavenging application with enhanced efficiency (2015, background): “Piezoelectric materials are one of the most important materials used for harvesting energies and many studies have been conducted on them [8–15].”
Energy harvesting from base excitation of ionic polymer metal composites in fluid environments (2009, background): “circuit elements is presented in [16], and energy harvesting”
An experimentally validated bimorph cantilever model for piezoelectric energy harvesting from base excitations (2009, background): “(Some figures in this article are in colour only in the electronic version)”
Analysis of power output for piezoelectric energy harvesting systems (2006, methodology): “The former includes [5, 24, 25, 30, 34, 38, 44], while the latter has been studied recently in [10, 19, 28].”
Large-scale vibration energy harvesting (2013, background): “Guyomar et al. (2005) investigated a nonlinear technology to increase the harvested power from a piezoelectric vibration energy harvester.”
Energy flow in piezoelectric energy harvesting systems (2010, methodology): “Guyomar et al proposed the SSHI technique [18, 29].”
Piezoelectric Energy Harvesting Solutions (2014, methodology): “Another possible circuital interface is the parallel-SSHI (synchronized switch harvesting on inductor) [129–131].”
Revisit of series-SSHI with comparisons to other interfacing circuits in piezoelectric energy harvesting (2010, positive): “Different from the case of the parallel-SSHI technique [12], the piezoelectric element is under an open circuit condition for most of the vibration time due to a quick inversion of the piezoelectric voltage operated by the switch.”
Vibration energy scavenging via piezoelectric bimorphs of optimized shapes (2010, methodology): “Important contributions relating to the design of optimized piezoelectric vibration scavenging devices were identified in literature (Priya and Inman 2009; Erturk and Inman 2008, 2009; Goldschmidtboeing and Woias 2008; Guyomar et al. 2005; Mateu and Moll 2005; Roundy and Wright 2004; Roundy et al. 2”
Frequency Self-tuning Scheme for Broadband Vibration Energy Harvesting (2010, background): “…here will be made only of a bridge rectifier connected to a smoothing capacitance CS and a load RL (Figure 1), although more efficient energy interfaces can be considered (Badel et al., 2005; Guyomar et al., 2005, 2009; Lefeuvre et al., 2006; Lallart and Guyomar, 2008; Lallart et al., 2008b).”
Novel piezoelectric bistable oscillator architecture for wideband vibration energy harvesting (2013, positive): “Nonlinear methods such as SSHI [2][3] and SECE [4] have shown better performance than the standard impedance matching approach [5,6].”