Calibration of Stress-triaxiality Dependent Crack Formation Criteria: A New Hybrid Experimental–Numerical Method
By D. Mohr, S. Henn. 2007
190 citations recorded by the source corpus.
Subfields: Materials Chemistry, Mechanical Engineering, Mechanics of Materials
View Paper: https://www.semanticscholar.org/paper/b524b87215d75aaaf98178e13b5d4d12f6ffb4c9
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Materials Chemistry
In Mechanical Engineering
In Mechanics of Materials
Citations in the corpus
- Effect of Lode parameter on plastic flow localization after proportional loading at low stress triaxialities (2014, background): “…introduction of loading, the localization of deformation at the specimen level (necking), and the detection of the onset of fracture (e.g. Bao and Wierzbicki, 2004, Mohr and Henn, 2007, Brünig et al., 2008, Fagerholt et al., 2010, Gao et al., 2011, Dunand and Mohr, 2011a, Haltom et al., 2014).”
- Micromechanically-motivated phenomenological Hosford–Coulomb model for predicting ductile fracture initiation at low stress triaxialities (2015, methodology): “Multi-axial experiments provide the only viable alternative to computational localization analysis (e.g. Hancock and Mackenzie (1976), Mohr and Henn (2007), Haltom et al. (2013)).”
- Ductile fracture of aluminum 2024-T351 under proportional and non-proportional multi-axial loading: Bao–Wierzbicki results revisited (2015, methodology): “The non-uniformity of the stress and strain fields in ductile fracture experiments requires a hybrid experimental–numerical analysis of the measurements (e.g. Mohr and Henn, 2007; Barsoum and Faleskog, 2007; Dunand and Mohr, 2010; Faleskog and Barsoum, 2013).”
- Experiments and modeling of anisotropic aluminum extrusions under multi-axial loading – Part II: Ductile fracture (2012, background): “The shape of the specimen has been designed such that fracture initiates near the specimen center at a stress state of pure shear (Mohr and Henn, 2004, 2007; Dunand and Mohr, 2011).”
- Ductile fracture experiments with locally proportional loading histories (2016, methodology): “, 2005; Korkolis and Kyriakides, 2009), the tension-shear loading of butterfly specimens (Wierzbicki et al., 2005; Mohr and Henn, 2007; Mae et al., 2007; Dunand and Mohr, 2011, Abedini et al., 2015) and the biaxial loading of cruciform-like specimens (e.”
- Hybrid experimental–numerical analysis of basic ductile fracture experiments for sheet metals (2010, background): “Mohr and Henn (2007) proposed a butterfly-shaped flat specimen to study the onset of fracture over a wide range of stress triaxialities.”