Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete
By Louis Turner, F. Collins. 2013
2,191 citations recorded by the source corpus.
Abstract Concrete for construction has traditionally been based on an Ordinary Portland Cement (OPC) binder. Geopolymers, an alternative binder based on fly ash (a fine waste collected from the emissions liberated by coal burning power stations) that is activated by an alkaline activator, have potential to lower the significant carbon footprint of OPC concrete. This paper presents the results of comprehensive carbon footprint estimates for both geopolymer and OPC concrete, including energy expending activities associated with mining and transport of raw materials, manufacturing and concrete construction. Previous studies have shown a wide variation of reported emission estimates: the results of this study are benchmarked with data from those studies.
Subfields: Building and Construction, Civil and Structural Engineering
View Paper: https://www.semanticscholar.org/paper/adec4cfcfe5e69ff571b79291750f3f63c05d049
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Building and Construction
In Civil and Structural Engineering
Citations in the corpus
- Chemical acceleration of a neutral granulated blast-furnace slag activated by sodium carbonate (2015, background): “Sodium silicates provide the highest strength [1–4] and chemical resistance [5], but their usage is associated with high shrinkage [1,4,6,7], challenging rheology of fresh concrete mix, relatively high cost of the concretes and high amounts of associated CO2 emissions [8].”
- Strength development and durability of alkali-activated fly ash mortar with calcium carbide residue as additive (2018, positive): “According to the reports of Turner and Collins [4] and Teh et al. [5], the low carbon footprint of the alkali-activated bind is only when it is used with sodium hydroxide solution [6].”
- Recent Progress in Green Cement Technology Utilizing Low-Carbon Emission Fuels and Raw Materials: A Review (2019, background): “Thus, cement industry is responsible for approximately 5–7% of total CO2 emissions [8].”
- Green Concrete: By-Products Utilization and Advanced Approaches (2019, background): “New developments can also be seen in the near future, including smart concrete in sever conditions, eco-binders that aim to reduce the amount of OPC, therefore, CO2 emissions, and self-healing concrete [33], to mention a few.”
- Characterization and application of municipal solid waste incineration (MSWI) bottom ash and waste granite powder in alkali activated slag (2017, methodology): “The carbon footprint used in this calculation: NaOH (1.915 tCO 2 /t), commercial waterglass (1.514 tCO 2 /t), OPC (0.82 tCO 2 /t), slag (0.143 tCO 2 /t), fi ne aggregate (0.0139 tCO 2 /t), coarse aggregate (0.0459 tCO 2 /t) were obtained from (Collins, 2010; Turner and Collins, 2013).”
- Alkali-activated concrete: Engineering properties and stress–strain behavior (2015, background): “Turner and Collins [13] recently suggested that alkali-activated binders can result in as much as 45% reduction in total carbon emissions associated with concrete production.”