Effect of tool shape on mechanical properties and microstructure of friction stir welded aluminum alloys
By H. Fujii, L. Cui, M. Maeda, K. Nogi. 2006
322 citations recorded by the source corpus.
Subfields: Mechanical Engineering
View Paper: https://www.semanticscholar.org/paper/ac3a39afb89fa3c9dab712962a3910f8c1794bbd
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Mechanical Engineering
Citations in the corpus
- Influence of friction stir welding parameters on the microstructural and mechanical properties of AA 6016-T4 thin welds (2009, background): “The influence of tool shoulder [44] and pin [ 24 ] geometries in the weld characteristics was also analysed.”
- Review: Friction stir welding tools (2011, methodology): “A triangular or ‘trifluted’ tool pin increases the material flow compared with a cylindrical pin.78 The axial force on the workpiece material and the flow of material near the tool are affected by the orientation of threads on the pin surface.101 Fujii et al.82 achieved defect free welds in softer a”
- Influence of tool geometry and rotational speed on mechanical properties and defect formation in friction stir lap welded 5456 aluminum alloy sheets (2014, background): “3 Because of the important role played by tool geometry in process optimization of FSW, a large number of studies have been reported in the literature on the effect of tool geometry on microstructure evolution and mechanical properties [6-14].”
- Effect of Tool Pin Profile and Tool Rotational Speed on Mechanical Properties of Friction Stir Welded AA6061 Aluminium Alloy (2008, background): “[18] investigated the effect of tool shape on mechanical properties and microstructure of friction stir welded AA5083 aluminium alloy.”
- Multiobjective Optimization of Friction Stir Welding Process Parameters on Aluminum Alloy AA 5083 Using Taguchi-Based Grey Relation Analysis (2010, methodology): “Therefore, the rotation speed should be decreased (600 rpm) so that plastic deformation of the material could be transported from the front to the back of the tool effectively [16].”