Continuous, large strain, tension/compression testing of sheet material

282 citations recorded by the source corpus.

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

A practical two-surface plasticity model and its application to spring-back prediction (2007, methodology): “The hardening behavior during loading and unloading was measured utilizing the continuous tension/compression test, which was performed with a designed device preventing buckling under compression (Lou et al., 2007; Boger et al., 2005; Lee et al., 2005a).”
Hardening evolution of AZ31B Mg sheet (2007, methodology): “…direction (TD), and 45 to the rolling directions (45 ), with a rectangular cross-section of 13 mm width by 1, 3.2, or 6.4 mm thickness and a gage length of 50 mm. Testing was carried out using an Instron 1322 universal testing machine with load cell and laser extensometer (Boger et al., 2005).”
Testing and modelling of material behaviour and formability in sheet metal forming (2014, methodology): “In [43] a normal pressure was applied to the specimen surface by means of plates moved by hydraulic actuators and the strains were concentrated only along the exposed side of the specimen.”
Advances in anisotropy and formability (2010, unknown): “[51], Cao [69]).”
Mechanical response and texture evolution of AZ31 alloy at large strains for different strain rates and temperatures (2011, methodology): “For high temperature compression experiments the stroke data was corrected using a blank test following the method of Khan et al. (2004).”