On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance

By S. Leuders, M. Thöne, A. Riemer, Thomas Niendorf, T. Tröster, H. Richard, Hans Jürgen Maier. 2013

1,393 citations recorded by the source corpus.

Subfields: Automotive Engineering, Materials Chemistry, Mechanical Engineering

View Paper: https://www.semanticscholar.org/paper/a98f80e2782f90341f0144e98d48390943b6f428

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Automotive Engineering

In Materials Chemistry

In Mechanical Engineering

Citations in the corpus

Criticality of porosity defects on the fatigue performance of wire + arc additive manufactured titanium alloy (2019, background): “2 bed fusion in stress relieved condition [6] and electron powder bed fusion [7] are all comparable with the traditional wrought counterparts.”
Ti-6Al-4V triply periodic minimal surface structures for bone implants fabricated via selective laser melting. (2015, background): “…in the heat treated sample may be due to the very small phase fraction caused by the heat treatment temperature of 680 o C, which is much lower compared to the -transus temperature of Ti-6Al-4V, as the phase fraction is increasing with increasing heat treatment temperature (Leuders et al. 2013).”
Improving the fatigue behaviour of a selectively laser melted aluminium alloy: Influence of heat treatment and surface quality (2016, background): “Although the porosity of SLM parts, processed with optimised parameters, does not drastically reduce the load bearing area and might not be therefore sufficient to reduce the stiffness of the material in load bearing applications [13], this is not the case for fatigue performance [21], which is stro”
Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting (2016, methodology): “7 and large aspect ratio, can be critical from a mechanical point of view if they are oriented perpendicularly to the load direction [32,50].”
Fatigue and fracture behaviour of laser powder bed fusion stainless steel 316L: Influence of processing parameters (2017, background): “Fatigue fracture surface analyses often reveal surface or subsurface pores at crack origins [6, 7, 9-12].”