Activation of hydration properties of iron ore tailings and their application as supplementary cementitious materials in cement

By G. Yao, Qiang Wang, Zhi-ming Wang, Junxiang Wang, X. Lyu. 2020

163 citations recorded by the source corpus.

Abstract In this study, the effects of mechanical activation on the potential pozzolanic activity, hydration properties of iron ore tailings (IOTs), and their application as supplementary cementitious materials in cement were studied. It was found that structural degradation of the IOTs occurred with prolonged grinding time and the mechanically activated IOTs possessed cementitious properties in the alkaline environment provided by calcium oxide. Fibre-like ettringite and amorphous C–S–H gel were the major hydration products of the ground IOTs–calcium oxide–anhydrite system. With increasing curing time, the composition of the C–S–H gel shifted towards a lower atomic ratio of Ca/Si, reaching 0.84 after curing for 28 days. The activity index of mechanical activated IOTs was qualified, and the developed cements blended with 10 wt%, 20 wt%, and 30 wt% activated IOTs were prepared, and their mechanical and physical properties met the design requirements for 32.5 composite Portland cement.

Subfields: Civil and Structural Engineering, Materials Chemistry

View Paper: https://www.semanticscholar.org/paper/a8b81906e55372b926b1d50f9c7072830f6b89ce