Production of solid biochar fuel from waste biomass by hydrothermal carbonization
By Zhengang Liu, Augustine Quek, S. Hoekman, R. Balasubramanian. 2013
746 citations recorded by the source corpus.
Subfields: Biomedical Engineering
View Paper: https://www.semanticscholar.org/paper/a6f72eca96961b7934bbff5db429a8b823ee38f3
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Biomedical Engineering
Citations in the corpus
- Production of solid fuel biochar from waste biomass by low temperature pyrolysis (2015, background): “The difference between pyrolytic biochar and hydrothermal biochar reveals that the biomass underwent a less decomposition/carbonization degree under pyrolysis conditions compared to hydrothermal carbonization at same temperature [19].”
- Hydrothermal Carbonization: Modeling, Final Properties Design and Applications: A Review (2018, background): “The oxygen content of the feedstock has also been shown to decrease with increasing reaction temperature; this phenomena has been reported as the most significant contribution to the declining trend of recoverable solids [36,39] and increasing energy content at higher temperatures [4,35].”
- Assessment of Pistachio Shell Biochar Quality and Its Potential for Adsorption of Heavy Metals (2015, background): “The peaks at 2850 and 2920 cm-1, also seen in all samples, are ascribed to aliphatic C−H deforming vibration [33, 34].”
- Application of biochar for the removal of pollutants from aqueous solutions. (2015, neutral): “Most studies about HTC were concerned with its use for making energy-dense solid fuel from lignocellulosic biomass (Liu et al., 2013; Reza et al., 2013; Yan et al., 2014).”
- Upgrading of waste biomass by hydrothermal carbonization (HTC) and low temperature pyrolysis (LTP): A comparative evaluation (2014, methodology): “6, the main difference among the spectra of raw biomass, hydrothermally prepared biochars and pyrolytic biochars was the peak at 1064 cm 1 which was ascribed to the b-glycosidic bond in cellulose and hemicellulose [3].”
- Fate of inorganic material during hydrothermal carbonisation of biomass: Influence of feedstock on combustion behaviour of hydrochar (2016, background): “This will make the fuel more favourable as generally a fuel with low H /C and O/C ratios have reduced energy losses due to smoke and water vapour during the combustion process (Liu et al., 2013).”