Cutting tool wear in the machining of hardened steels
By J. Barry, Gerry Byrne. 2001
143 citations recorded by the source corpus.
Subfields: Biomedical Engineering, Materials Chemistry, Mechanical Engineering
View Paper: https://www.semanticscholar.org/paper/a5d1e42b87a0a67e79a2121762a662b70b66ecd5
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Biomedical Engineering
- Y. Şahin
- Luís Figueira
- Yigit Karpat
- Tugrul Özel
- J. Paulo Davim
- Chung-Chen Tsao
- V. Gaitonde
- S. Basavarajappa
In Materials Chemistry
In Mechanical Engineering
- Y. Şahin
- Luís Figueira
- Yigit Karpat
- Tugrul Özel
- J. Paulo Davim
- Chung-Chen Tsao
- V. Gaitonde
- S. Basavarajappa
Citations in the corpus
- Modelling of surface finish and tool flank wear in turning of AISI D2 steel with ceramic wiper inserts (2007, background): “Experimental results indicate that surface roughness Ra values as low as 0.18–0.20 m are ttainable with wiper tools.”
- Predictive modeling of surface roughness and tool wear in hard turning using regression and neural networks (2005, background): “Furthermore, workpiece hardness has a profound effect on the cutting life of the CBN tools [7,12,13,15].”
- Comparison of tool life between ceramic and cubic boron nitride (CBN) cutting tools when machining hardened steels (2009, background): “The flank wear rates were proportional to cutting speed and high CBN tools exhibited accelerated thermal wear when finish turning of hardened AISI 52100 steels (Chou et al.2002, Barry and Byrne, 2001).”