Characterization of polymeric structural foams under compressive impact loading by means of energy-absorption diagram
By M. Avalle, Giovanni Belingardi, Roberto Montanini. 2001
644 citations recorded by the source corpus.
Subfields: Mechanical Engineering, Mechanics of Materials, Polymers and Plastics
View Paper: https://www.semanticscholar.org/paper/a35aff690e4ab73b3bd06a5a26efacef77740fb0
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Mechanical Engineering
- Andrea Ibba
- Qingming Li
- Hong-jun Hu
- Giovanni Belingardi
- I. Magkiriadis
- M. Avalle
- D. Ruan
- J. Harrigan
In Mechanics of Materials
In Polymers and Plastics
Citations in the corpus
- Polypropylene foam behaviour under dynamic loadings : Strain rate, density and microstructure effects (2009, neutral): “stress plateau phase the foam can undergo large compressive strains and absorb a considerable amount of specific energy [22].”
- Review article: Polymer-matrix Nanocomposites, Processing, Manufacturing, and Application: An Overview (2006, background): “Polymeric foams are extensively used in different applications such as aerospace, marine, automotive, packaging, and cushioning due to their energy absorption capabilities especially in the event of impact loading [299], good moisture resistance, dampening characteristics (sound, vibration, and osci”
- Mechanical Models of Cellular Solids, Parameters Identification from Experimental Tests (2005, methodology): “Each foam should be used on the impact energy and maximum stress value defined by its maximum efficiency conditions [5-6].”
- Static and dynamic mechanical properties of expanded polystyrene (2015, background): “[26] found EPS could dissipate kinetic energy upon impact whilst reduce force transfer through the EPS.”
- Compressive Strain at the Onset of Densification of Cellular Solids (2006, background): “An energy efficiency parameter to identify the condition for the optimal energy absorption of foam is used in [9].”
- Compression behavior of warp-knitted spacer fabrics for cushioning applications (2012, background): “–6 This is the typical behavior required by a cushioning material in compression.(1) In the published results, relatively constant loads at the plastic plateau stage were observed.”