Multiscale carbon nanotube-carbon fiber reinforcement for advanced epoxy composites.

By E. Bekyarova, Erik T. Thostenson, A. Yu, H. Kim, Junbo Gao, Jason M. Tang, Hahn Ht, T. Chou, M. Itkis, R. Haddon. Langmuir, 2007

909 citations recorded by the source corpus.

Subfields: Materials Chemistry, Mechanical Engineering

View Paper: https://www.semanticscholar.org/paper/a31f21a72d4a6c27a67f7f4a7b10596237bac6d2

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Materials Chemistry

1. Brian L. Wardle
2. S. Khan
3. N. Yamamoto
4. Jang‐Kyo Kim
5. A. Díez-Pascual
6. A. Jiménez‐Suárez
7. Mónica Campo
8. L. Dai

In Mechanical Engineering

1. S. Khan
2. Jang‐Kyo Kim
3. L. Gorbatikh
4. Y. Swolfs
5. A. Díez-Pascual
6. L. Dai
7. Brian L. Wardle
8. E. J. García

Citations in the corpus

• Mechanical, thermal and interfacial performances of carbon fiber reinforced composites flavored by carbon nanotube in matrix/interface (2017, methodology): “[17] authenticated that a uniform distribution of CNTs on the surface of carbon fabric could be obtained using EPD technique, in which both as-received and oxygenated CNTs were deposited onto CFs.”
• Recent advances in fibre-hybrid composites: materials selection, opportunities and applications (2019, background): “be strongly improved by adding carbon nanotubes to the epoxy matrix [164].”
• Limiting Mechanisms of Mode I Interlaminar Toughening of Composites Reinforced with Aligned Carbon Nanotubes (2009, neutral): “Recent work using randomly oriented carbon nanofibers and CNTs placed between plies using different techniques (unaligned CNTs mixed between tows [14], electrophoresis [15], additional CNT/epoxy layer [16], and spraying [17]) have shown limited enhanced reinforcement (to a maximum of 30% for the ele”
• Influence of carbon nanotubes on the thermal, electrical and mechanical properties of poly(ether ether ketone)/glass fiber laminates (2011, background): “[10] Bekyarova E, Thostenson ET, Yu A, Kim H, Gao J, Tang J, et al.”
• Fabrication and multifunctional properties of a hybrid laminate with aligned carbon nanotubes grown In Situ (2008, background): “More success has been achieved with nanoscale modification of the interface between composite plies, by growing CNTs on the surface of cloth [11] or placing unaligned CNTs at low Vf on fibers (including at the ply interface) [12,13].”