The development of design rules for selective laser melting

By Daniel Thomas. 2009

249 citations recorded by the source corpus.

View Paper: https://www.semanticscholar.org/paper/a2be7f837821fbc116fff9c7886f8ad8c01e670d

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

Citations in the corpus

Process defects and in situ monitoring methods in metal powder bed fusion: a review (2017, unknown): “Regarding the size of the part, shrinkage has been reported by different authors (Thomas, 2009; Sharratt, 2015), even though the opposite effect (i.e., parts that are systematically larger than the nominal) is not uncommon.”
A new methodological framework for design for additive manufacturing (2016, background): “Thomas’ (2009) research focuses on the geometric limits imposed by SLM and is based on series of experiments.”
Design for Additive Manufacturing – Supporting the Substitution of Components in Series Products (2014, background): “Current research addresses two issues: the development of design rules by identifying and quantifying remaining restrictions in manufacturability [7,8], and assessing the impact on the design process [9,10,11].”
3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting (2019, background): “They are required for large overhang regions – downward facing surfaces or unconnected regions [82].”
On design for additive manufacturing: evaluating geometrical limitations (2015, background): “7 mm for LS and Thomas (2009) who recommends a thickness of 0.”
High Cycle Fatigue (HCF) Performance of Ti-6Al-4V Alloy Processed by Selective Laser Melting (2013, background): “The process continues until the entire part is manufactured [1,2].”
Additive manufacturing-enabled design theory and methodology: a critical review (2015, background): “These issues can be listed but not limited to available materials, geometric limitations (such as minimum wall thickness and minimum clearance [15]), dimensional accuracy [16], and surface roughness, support design and removal for some techniques like selective laser sintering (SLS), lowmechanical p”
A review on powder bed fusion technology of metal additive manufacturing (2017, methodology): “It was developed by Fockele and Schwarze (F&S) in cooperation with the Fraunhofer institute of laser technology in 1999 and then commercialized with MCP Realizer250 machine by MCP HEK Gmbh (now SLM Solutions Gmbh) in 2004 [11].”