Recent developments in reverse osmosis desalination membranes
By Dan Li, Huanting Wang. 2010
491 citations recorded by the source corpus.
Subfields: Biomedical Engineering, Electrical and Electronic Engineering, Water Science and Technology
View Paper: https://www.semanticscholar.org/paper/a06d0cbf8d58dd03f4548381cfe4b079ac559e34
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Biomedical Engineering
In Electrical and Electronic Engineering
In Water Science and Technology
Citations in the corpus
- Fabrication and characterization of polyamide thin film nanocomposite (TFN) nanofiltration membrane impregnated with TiO2 nanoparticles (2013, background): “Lower operation cost, higher water flux and good rejection of salt or organic compounds with low molecular weights (200 to 500 g mol−1) are the most significant advantages of these new membranes compared to the traditional RO membranes[1–8].”
- Interfacial polymerization of polyamide-aluminosilicate SWNT nanocomposite membranes for reverse osmosis (2013, background): “However, substantial innovations in RO membrane engineering are still in high exigency because of the increasing needs for desalination membranes with enhanced permeate flux, higher salt rejection, and greater resistance to fouling [9].”
- Polymer-matrix nanocomposite membranes for water treatment (2015, methodology): “Based on the solution–diffusion theory widely used to describe the mass transport in the PA TFC membrane [204,205], an increase in hydrophilicity of membranes could facilitate water solubilization and diffusion through the membrane, thus improve water permeability [206].”
- A novel thin film nanocomposite reverse osmosis membrane with superior anti-organic fouling affinity for water desalination (2015, unknown): “In this regard, brackish/seawater desalination and wastewater recovery are considered as the two major alternatives [1–3].”