Effect of transient creep on compressive strength of geopolymer concrete for elevated temperature exposure

By Z. Pan, J. Sanjayan, F. Collins. 2014

152 citations recorded by the source corpus.

Abstract The strength and transient creep of geopolymer and ordinary Portland cement (OPC)-based material (paste and concrete) were compared at elevated temperatures up to 550 °C. The strength properties were determined using an unstressed hot strength test and unstressed residual strength test for paste and concrete, respectively. At 550 °C, compared with the original strength, the strength of geopolymer was increased by 192% while the strength of OPC paste showed little change. However, after exposure to 550 °C, the residual strength percentage of both geopolymer and OPC concretes was similar. Transient creep data show that geopolymer had little change in transitional thermal creep (TTc) between 250 and 550 °C while OPC paste developed significant TTc in this temperature range. In comparison with OPC concrete, a higher strength loss of geopolymer concrete is thus believed to be due to the absence of TTc to accommodate nonuniform deformation during thermal exposure.

Subfields: Civil and Structural Engineering

View Paper: https://www.semanticscholar.org/paper/9dcbfa6ab189b1aaa646cc3310b0010c791e128c

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Civil and Structural Engineering

  1. I. Luhar
  2. Salmabanu Luhar
  3. A. Castel
  4. D. Nicolaides
  5. S. Foster
  6. J. Liggat
  7. Leung Tang
  8. Jason Fung

Citations in the corpus