Ultrahigh-performance TiNi shape memory alloy by 4D printing
By H. Z. Lu, Chao Yang, X. Luo, Hongwei Ma, B. Song, L. Yufei, Lai‐Chang Zhang. Materials Science & Engineering: A, 2019
185 citations recorded by the source corpus.
Abstract For additively manufactured components, it's widely accepted to have high enough energy input to facilitate nearly full density and low enough energy input to avoid cracking tendency. In this work, ultrahigh-performance Ti 50.6 Ni 49.4 (at.%) shape memory alloy (SMA) was manufactured by selective laser melting (SLM) under high enough energy inputs (155–292 J/mm 3 ). The microstructure, phase transformation behaviors, mechanical and shape memory properties of the SLM-manufactured SMA were investigated by various characterization methods of X-ray diffraction, scanning and transmission electron microscopies, differential scanning calorimetry, room temperature and stress-controlled cyclic tensile tests, etc. Results show that the martensite content and the austenite and martensitic transformation temperatures decrease with the decrease of laser energy input (the increase of laser scanning speed). Interestingly, the SLM-manufactured SMA exhibits ultrahigh tensile strength of 776 MPa and elongation of 7.2% under room-temperature tensile condition. In addition, stress-controlled cyclic tensile tests under 400 MPa indicate that the SLM-manufactured SMA has ultrahigh shape memory effect of 98.7% recovery ratio and 4.99% recoverable strain after ten times loading-unloading cycle. The ultrahigh mechanical and shape memory properties are associated to the combined effects of dispersedly distributed nano-sized Ti 2 Ni precipitates, ultrafine grains and profuse dislocations in the SLM-manufactured SMA. This work substantiates, for the first time, high enough energy input in SLM can be applied to manufacture ultrahigh-performance TiNi SMAs.
Subfields: Materials Chemistry
View Paper: https://www.semanticscholar.org/paper/9bf54cbee2815ea53db0e1b585f4d52e01e5de97
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Materials Chemistry
Citations in the corpus
- Laser powder bed fusion for metal additive manufacturing: perspectives on recent developments (2020, methodology): “99% recoverable strain after 10 loading-unloading cycles (Lu et al. 2019).”
- Laser powder bed fusion additive manufacturing of NiTi shape memory alloys: a review (2023, background): “9): P = 200 W, v= 1080 mm·s−1, Ev = 57.87 J·mm−3; Ni-rich (Ni50.”
- The microstructure of a selective laser melting (SLM)-fabricated NiTi shape memory alloy with superior tensile property and shape memory recoverability (2020, unknown): “…worse tensile fracture strain [3–7], no Lüders-band phase transformation during tensile testing [8], disappointing fatigue performance [5,9], boarder and shorter phase transformation peaks in the differential scanning calorimetry curve [4–6,10] , and a precipitate [14], dislocation and twins [15].”