Rheological properties of microfibrillar suspension of TEMPO-oxidized pulp

By Elsa Lasseuguette, D. Roux, Y. Nishiyama. 2008

275 citations recorded by the source corpus.

Subfields: Biomaterials, Biomedical Engineering, Food Science

View Paper: https://www.semanticscholar.org/paper/97940aab54365fb5bf44cec30c1ede71640d19d8

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Biomaterials

In Biomedical Engineering

In Food Science

Citations in the corpus

State of the Art Manufacturing and Engineering of Nanocellulose: A Review of Available Data and Industrial Applications (2013, methodology): “Rheometry measurements performed on NFCs suspensions prepared via TEMPO-oxidation [139] also showed shear-thinning behavior following a power-law and thixotropy.”
Microfibrillated cellulose and new nanocomposite materials: a review (2010, methodology): “TEMPO-mediated oxidation is a promising method for surface modification of native celluloses, by which carboxylate and aldehyde functional groups can be introduced into solid native celluloses under aqueous and mild conditions (Saito and Isogai 2005, 2006, 2007; Saito et al. 2005, 2007, 2009; Habibi”
Concentration effects on the isolation and dynamic rheological behavior of cellulose nanofibers via ultrasonic processing (2013, background): “…because of the harsh treatment (Rudraraju and Wyandt 2005; Wang and Chen 2011; Liu et al. 2011; Ureña-Benavides et al. 2011) or was modified by chemical reagents, e.g., oxidation (Lasseuguette et al. 2008; Ishii et al. 2011), acylation (Zhou et al. 2011), or esterification (Guo et al. 2011).”
Production and modification of nanofibrillated cellulose using various mechanical processes: a review. (2014, background): “Lee et al. (2009) examined the effect of various passing times (1–20) of microcrystalline cellulose (MCC) through microfludizer at 137.9 MPa on the morphology of cellulose nanofibrils.”
Estimation of cellulose nanofibre aspect ratio from measurements of fibre suspension gel point (2013, methodology): “…NIST90 and 60 samples, ranged from 1.76 to 5.37 kg/m3 (Zhang et al. 2012) while the gel-point estimated from the change of slope of viscosity as a function of solids concentration of a MFC sample prepared by TEMPO oxidation of sulphite pine pulp was approximately 2 kg/m3 (Lasseuguette et al. 2008).”
Sulfonated cellulose nanofibrils obtained from wood pulp through regioselective oxidative bisulfite pre-treatment (2013, background): “The viscosities exhibited typical shear thinning behavior (Pääkkö et al. 2007; Lasseuguette et al. 2008), except for the sample with the highest content of sulfonated groups which possessed notably lower and almost constant viscosity after five passes through homogenizer.”
Carboxymethylated nanofibrillated cellulose: rheological studies (2014, unknown): “These investigated systems display the wellknown (Lasseuguette et al. 2008; Herrick et al. 1983; Iotti et al. 2011; Karppinen et al. 2012) shear-thinning behaviour with increasing shear rate associated with NFC systems; the observed increasing shear viscosity with increasing dry content is another r”
Fabrication and characterization of cellulose nanofiber based thin-film nanofibrous composite membranes (2014, background): “The possible reason could be that the cellulose nanofibers would be aggregated into bundles at high cellulose concentrations after freeze drying [45].”
Renewable cellulosic nanocomposites for food packaging to avoid fossil fuel plastic pollution: a review (2020, background): “5% cellulose (Lasseuguette et al. 2008). Li et al. (2015b) investigated the structure-morphology-rheology relationships for cellulose nanoparticles and observed that the viscosity of the cellulose nanocrystals suspensions gradually increases as the concentration increases because of the growth in th”