Investigation of Liquid Flow in Microchannels

By Dong Liu, Suresh V. Garimella. 2002

262 citations recorded by the source corpus.

View Paper: https://www.semanticscholar.org/paper/94955230f7b2bfbba173396dea2a986f911cca5b

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Mechanical Engineering

Citations in the corpus

A comprehensive flow regime map for microchannel flow boiling with quantitative transition criteria (2010, methodology): “For single-phase flow, Liu and Gar imella [22] and Lee et al.”
Boiling and Evaporation in Small Diameter Channels (2003, background): “Several recent studies have compared careful measurements of pressure loss or velocity profiles for liquids flowing in microchannels to standard results [29, 30, 31]; agreement is excellent down to hydraulic diameters of 75 μm or so.”
Pressure Drop of Fully-Developed, Laminar Flow in Microchannels of Arbitrary Cross-Section (2006, methodology): “Recently, Liu and Garimella [6] and Wu and Cheng [7] conducted experiments in smooth rectangular and trapezoidal microchannels, respectively; they reported that the Navier-Stokes equations are valid for laminar flow in smooth microchannels.”
Fluid flow and heat transfer in wavy microchannels (2010, methodology): “[37] studied the flow in 15–150 lm diameter microtubes with Reynolds numbers of 8– 2300; Liu and Garimella [40] considered microchannels over a hydraulic diameter range of 244–974 lm.”
Investigation of heat transfer in rectangular microchannels (2005, methodology): “A schematic of the experimental facility used in this investigation, which was modified from that used for pressure drop measurements in [10], is shown in Fig.”
Thermal management for high power lithium-ion battery by minichannel aluminum tubes (2016, background): “More details for theoretical predictions are given in Liu’s work [38].”
Influence of channel shape on the thermal and hydraulic performance of microchannel heat sink (2011, background): “Liu and Garimella [5] conducted flow visualization and pressure drop studies on rectangular straight microchannels with hydraulic diameters ranged from 244 to 974 μm over a Reynolds number range of 230 to 6500.”