Effects of overdischarge on performance and thermal stability of a Li-ion cell

By H. Maleki, J. Howard. 2006

274 citations recorded by the source corpus.

Subfields: Automotive Engineering, Electrical and Electronic Engineering

View Paper: https://www.semanticscholar.org/paper/8f03478429bdf6f24121599b9dac2cc366b488cb

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Automotive Engineering

In Electrical and Electronic Engineering

Citations in the corpus

Complex metal hydrides for hydrogen, thermal and electrochemical energy storage (2017, background): “Deep discharge: Unlike rechargeable batteries [270], metal hydride systems do not, in general, suffer capacity loss from being fully discharged [263].”
Advanced Fault Diagnosis for Lithium-Ion Battery Systems: A Review of Fault Mechanisms, Fault Features, and Diagnosis Procedures (2020, background): “Accelerated battery degradation is caused by undesired side reactions within a cell, which are accompanied by the losses of cyclable Li ions and active material [89], [90].”
A failure modes, mechanisms, and effects analysis (FMMEA) of lithium-ion batteries (2015, background): “Copper content on the electrode surfaces, in the electrolyte, or on the separator can be observed through energy dispersive spectroscopy (EDS) [74] or XPS; however, the relationship between the quantity of copper and the likelihood of short circuit has not been suitably quantified.”
A review on fault mechanism and diagnosis approach for Li-Ion batteries (2015, unknown): “0V were carried out in [31].”
Practical Capacity Fading Model for Li-Ion Battery Cells in Electric Vehicles (2013, background): “Furthermore, overdischarge [14], overcharge, and high C-rates [10] were also observed to enhance the capacity fading rate.”
A review of the internal short circuit mechanism in lithium‐ion batteries: Inducement, detection and prevention (2021, result): “Cu could migrate through the separator to the cathode, which can cause ISC after charging.(62) Our previous investigation on the ISC of large-format LIBs (cathode: LiyNi1/3Co1/3Mn1/3O2 [NCM], anode: graphite) during the overdischarge process.”