Tribological properties and lubricating mechanisms of Cu nanoparticles in lubricant

By He-long Yu, Y. Xu, P. Shi, Binshi Xu, Xiao-li Wang, Qian Liu. 2008

247 citations recorded by the source corpus.

Subfields: Mechanical Engineering, Mechanics of Materials

View Paper: https://www.semanticscholar.org/paper/8dce8e22181f4600ea1dc133bd64cfabc845f2fe

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Mechanical Engineering

1. Wei Yu
2. Huaqing Xie
3. Han Huang
4. Dan Guo
5. Jianbin Luo
6. Zhengyi Jiang
7. H. Masjuki
8. Jingwei Zhao

In Mechanics of Materials

1. Dan Guo
2. Jianbin Luo
3. Zhengyi Jiang
4. G. Xie

Citations in the corpus

• A Review on Nanofluids: Preparation, Stability Mechanisms, and Applications of Ethylene Glycol – Water Based Nanofluids Dispersed with Multi Walled Carbon Nanotubes (2024, background): “It could be inferred that a thin copper protective film with lower elastic modulus and hardness was formed on the worn surface, which resulted in the good tribological performances of Cu nanoparticles, especially when the oil temperature was higher [87].”
• A study of the tribological behaviour of TiO2 nano-additive water-based lubricants (2017, background): “Due to the special physical and chemical properties of nanomaterials, considerable studies have been conducted in recent years using nanoparticles as additives in lubricating oil to improve the tribological properties of lubricants [3-22].”
• Improving the AW/EP ability of chemically modified palm oil by adding CuO and MoS2 nanoparticles (2015, unknown): “The lubrication-enhancing ability of nanoparticles is related to a variety of mechanisms, including the effects of ball bearings, polishing, mending, and protective film formation [7-13].”
• Tribological performance of nanoparticles as lubricating oil additives (2016, background): “…(Alves et al. 2013; Hernandez Battez et al. 2006, 2007, 2008b; Kumar Dubey et al. 2013; Pavlidou and Papaspyrides 2008; Viesca et al. 2011a, b; Yu et al. 2008; Zhou et al. 2000), and agitation by ultrasonic bath (Asrul et al. 2013; Gulzar et al. 2015b; Hu et al. 2011; Joly-Pottuz et al. 2008).”
• Friction and wear characteristics of TiO2 nano-additive water-based lubricant on ferritic stainless steel (2018, background): “[14] Yu HL, Xu Y, Shi PJ, Xu BS, Wang XL, Liu Q.”
• Mechanical properties of nanoparticles: basics and applications (2014, background): “Moreover, particle agglomeration is greatly determined by the interaction force between particles, thereby inhibiting rolling while promoting the sliding of nanoparticles in the contact area [229, 231].”