New Maximum Power Point Tracker Using Sliding-Mode Observer for Estimation of Solar Array Current in the Grid-Connected Photovoltaic System
By Il-Song Kim, Myung-Bok Kim, M. Youn. IEEE transactions on industrial electronics (1982. Print), 2006
328 citations recorded by the source corpus.
Subfields: Electrical and Electronic Engineering, Renewable Energy, Sustainability and the Environment
View Paper: https://www.semanticscholar.org/paper/8d626dce3daad4ebfca730d4ded4b10d69648d42
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Electrical and Electronic Engineering
- Rached Dhaouadi
- Ahmad Al Nabulsi
- Saad Mekhilef
- Praveen Kumar Bonthagorla
- Tarek Ahmed-Ali
- Remus Teodorescu
- Hemanshu Roy Pota
- Mohamed El Hachemi Benbouzid
In Renewable Energy, Sustainability and the Environment
- Rached Dhaouadi
- Ahmad Al Nabulsi
- Saad Mekhilef
- Praveen Kumar Bonthagorla
- Tarek Ahmed-Ali
- Remus Teodorescu
- Hemanshu Roy Pota
- Mohamed El Hachemi Benbouzid
Citations in the corpus
- Critical Review on PV MPPT Techniques: Classical, Intelligent and Optimisation (2020, background): “Thus, DC/DC converter is controlled by the above strategy [101, 102].”
- Simulation and Hardware Implementation of Incremental Conductance MPPT With Direct Control Method Using Cuk Converter (2011, background): “PV module characteristics are comprehensively discussed in [3], [6], [11], [28], and [29], which indicate an exponential and nonlinear relation between the output current and voltage of a PV module.”
- Insolation-oriented model of photovoltaic module using Matlab/Simulink (2010, background): “The terminal equation for the current and voltage of the cell array becomes as follows (Veerachary et al., 2002; Veerachary and Shinoy, 2005; Kim and Youn, 2005; Kim et al., 2006).”
- Efficiency Optimization of a DSP-Based Standalone PV System Using Fuzzy Logic and Dual-MPPT Control (2012, methodology): “The proposed standalone photovoltaic system consists of four main blocks: PV panel, solar tracker, DC/DC converter (charger), and the MPPT controller.”
- MPPT methods for solar PV systems: a critical review based on tracking nature (2019, background): “It gives control of the power converter, which tracks the MPP under the condition of varying irradiance [127, 128].”
- Renewable Energy Systems With Photovoltaic Power Generators: Operation and Modeling (2008, background): “As pointed out in [8], the necessity of measuring the array”
- Optimized Maximum Power Point Tracker for fast changing environmental conditions (2008, background): “There are many MPPT strategies available ( [2] [3] [4] [5] [6] [7] [8] [9 ], [10]), for different converter topologies, which provide h ig performance tracking during ’nice’ weather conditions, i.”
- A Center Point Iteration MPPT Method With Application on the Frequency-Modulated LLC Microinverter (2014, background): “For example, a linear relationship between VMPP and VOC of the PV panel is assumed in [3], a linear relationship between IMPP and ISC is assumed in [4], while a polynomial relationship between PV power and voltage is assumed in [5] and [6].”
- High-Order Sliding-Mode Control of Variable-Speed Wind Turbines (2009, methodology): “In our case, the MPPT strategy is based on the design of second-order sliding-mode controller that ensures the convergence of Ta to koptω(2) in finite time [23], [28].”
- On the Perturb-and-Observe and Incremental Conductance MPPT Methods for PV Systems (2013, unknown): “, [2], [5], [12], [14], [17], [19]–[30].”
- Optimized Maximum Power Point Tracker for Fast-Changing Environmental Conditions (2008, background): “There are many MPPT strategies that are available [2]–[10] for different converter topologies, which provide high performance tracking during “nice” weather conditions, i.”