Thermal Behavior and Microstructure Evolution during Laser Deposition with Laser-Engineered Net Shaping: Part II. Experimental Investigation and Discussion

By B. Zheng, Yizhang Zhou, J. Smugeresky, J. Schoenung, Enrique J. Lavernia. 2008

203 citations recorded by the source corpus.

Subfields: Computational Mechanics, Mechanical Engineering

View Paper: https://www.semanticscholar.org/paper/8b57b7f56dbeb81e9d3a98d1c1b2ad8a73fc7ac1

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Computational Mechanics

1. A. Uriondo
2. T. Mukherjee
3. A. Wilson-Heid
4. M. Esperon-Miguez
5. H. Wei
6. J. Zuback
7. Wei Zhang
8. S. Perinpanayagam

In Mechanical Engineering

1. T. DebRoy
2. T. Mukherjee
3. H. Wei
4. Amitava De
5. J. Elmer
6. Wei Zhang
7. J. Zuback
8. J. Milewski

Citations in the corpus

• Effect of different heat treatments on the microstructure and mechanical properties in selective laser melted INCONEL 718 alloy (2017, background): “[13] observed that for dendrite arm spacing, k of 1-2 μm, the cooling rates were of the order of 10(4) in LENS process for stainless steel builds, and hence, a similar high cooling rates for the current setup can also be expected.”
• The present and future of additive manufacturing in the aerospace sector: A review of important aspects (2015, background): “The typical microstructure attained is similar to that in the SLM process due to the high cooling rates (from 10(3)C/s to as high as 10(4)C/s).(47,48) Residual stresses are one of the most significant problems in MD processes.”
• Additive manufacturing of metallic components – Process, structure and properties (2018, background): “The ferrite content decreases with increasing cooling rate because of the reduced time for solute redistribution at high rates [466].”