Organic solar cells with carbon nanotube network electrodes

By M. Rowell, M. Topinka, M. McGehee, Hans-Jürgen Prall, Gilles Dennler, N. Serdar, Sariciftci, Liangbing Hu, G. Gruner. 2006

965 citations recorded by the source corpus.

Subfields: Electrical and Electronic Engineering, Materials Chemistry, Polymers and Plastics

View Paper: https://www.semanticscholar.org/paper/864958c56c496fbb5a033082857d3729de9341c7

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Electrical and Electronic Engineering

1. Liangbing Hu
2. Chongwu Zhou
3. Yi Cui
4. J. Xue
5. Jang‐Kyo Kim
6. Akshay Kumar
7. Weiran Cao
8. C. Carbonera

In Materials Chemistry

1. Jang‐Kyo Kim
2. Yi Cui
3. Q. Zheng
4. Chongwu Zhou
5. Akshay Kumar
6. Chang-Sik Ha
7. Youngkyoo Kim
8. Myeon-Cheon Choi

In Polymers and Plastics

1. J. Xue
2. Yi Cui
3. Liangbing Hu
4. Weiran Cao
5. Youngkyoo Kim
6. Kenneth D. Harris
7. Andrea Bernardi
8. Jang‐Kyo Kim

Citations in the corpus

• Scalable coating and properties of transparent, flexible, silver nanowire electrodes. (2010, background): “10 50 ohms/sq of high-end ITO on plastic, would prevent the practical application of transparent CNT electrodes in currentbased devices such as organic light emitting diodes and solar cells.(24) Graphene electrodes are an emerging candidate, with the best performance of 300 ohms/sq and 80% transmitt”
• Spray coated high-conductivity PEDOT:PSS transparent electrodes for stretchable and mechanically-robust organic solar cells (2013, background): “These characteristics place the device amongst the highest performing OSCs based on PEDOT:PSS anodes [16–63] which is likely the result of improved conductivity and transmittance of the PEDOT:PSS.”
• Uniform, highly conductive, and patterned transparent films of a percolating silver nanowire network on rigid and flexible substrates using a dry transfer technique (2010, background): “Carbon nanotube (CNT) films [11–15] and, more recently, graphene films [16–19] have attracted significant attention and have been successfully used as the TCE in organic light emitting diodes [20–22] and solar cells [23, 24].”
• Polymer- and carbon-based electrodes for polymer solar cells: Toward low-cost, continuous fabrication over large area (2012, methodology): “The preparation of P3HT:PCBM solar cells with thin spincoated active layers was only possible onto smooth SWNT films (with a root-mean-square, rms, surface roughness less than 10 nm over a surface of 25 mm) [152].”