Resonator-based analysis of the combination of mobile handset antenna and chassis
By P. Vainikainen, J. Ollikainen, O. Kivekäs, I. Kelander. 2002
530 citations recorded by the source corpus.
Subfields: Aerospace Engineering, Electrical and Electronic Engineering
View Paper: https://www.semanticscholar.org/paper/825d96812cb12a04fc617d51ae4241533501bed7
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Aerospace Engineering
In Electrical and Electronic Engineering
Citations in the corpus
- Multiband Handset Antenna Combining a PIFA, Slots, and Ground Plane Modes (2009, methodology): “this frequency, the radiation comes from the PCB rather than the PIFA-slot radiators [5].”
- Improvement of compact terminal antenna performance by incorporating open-end slots in ground plane (2004, methodology): “In order to assess the performance of the investigated PIFA antenna we apply a lumped-element dual resonator model, which was initially introduced in [1].”
- Printed $\lambda/8$ -PIFA for Penta-Band WWAN Operation in the Mobile Phone (2009, background): “This is largely because the system ground plane plays a more dominant role as a radiator in the lower band than in the upper band [ 24 ].”
- Detecting Vital Signs with Wearable Wireless Sensors (2010, background): “This scenario will not be discussed further in this paper; the interested reader is directed to the literature (see, for example, [53–59]).”
- Neutralized Coupling Elements for MIMO Operation in 4G Mobile Terminals (2014, background): “An impressive isolation level of 30 dB was obtained at 2.45 GHz.”
- Internal Compact Dual-Band Printed Loop Antenna for Mobile Phone Application (2007, unknown): “The results suggest that the ground plane length has small effects on the achievable bandwidths of the antenna, which is quite different from those observed for the conventional internal patch antenna for mobile phones [6], [ 7 ].”
- Multiband Handset Antenna With a Parallel Excitation of PIFA and Slot Radiators (2010, background): “The ground plane wave mode gets closer to 900 MHz reaching a better bandwidth [17]–[23].”
- Design of Orthogonal MIMO Handset Antennas Based on Characteristic Mode Manipulation at Frequency Bands Below 1 GHz (2014, methodology): “exist a number of excitation methods, such as placing a PIFA or a monopole on a short edge of the chassis [27], [28].”
- Bandwidth, SAR, and efficiency of internal mobile phone antennas (2004, methodology): “9 shows that at 1800 MHz, larger bandwidth is obtained when the short circuit of the patch is located on the top of the chassis (Loc1 and Loc2) than in the opposite case where the radiating edge is located on the top (Loc3 and Loc4), which is expected [4], [27].”
- Printed Monopole Slot Antenna for Internal Multiband Mobile Phone Antenna (2007, background): “Effects of the groundplane length on the performance of the antenna are generally smaller than those of the conventional internal mobile phone antennas [12], [13].”