Enhanced thermal conductivities and decreased thermal resistances of functionalized boron nitride/polyimide composites

By Yongqiang Guo, Lyu Zhaoyuan, Xutong Yang, Yuanjin Lu, Kunpeng Ruan, Yalan Wu, Jie Kong, Junwei Gu. Composites Part B: Engineering, 2019

359 citations recorded by the source corpus.

Abstract Fluorine-containing polyimide (PI) with low dielectric constant (e) value was firstly synthesized by a polycondensation reaction of 4, 4-(hexafluoroisopropyl) diphthalic anhydride (6FDA), 1, 3, 4-triphenyldiether diamine (APB) and 1, 3-bis(3-aminopropyl) tetramethyldisiloxane (GAPD). γ-glycidoxypropyltrimethoxysilane (KH-560) and aminopropylisobutyl polyhedral oligomeric silsesquioxane (NH2-POSS) were synchronously performed to functionalize the surface of boron nitride (f-BN) fillers, which were then utilized as thermally conductive fillers to fabricate the corresponding f-BN/PI composites. NH2-POSS was successfully grafted on the surface of BN fillers. All the f-BN/PI composites presented better thermal conductivities, dielectric and thermal properties than those of BN/PI composites at the same addition of BN fillers. The obtained thermal conductivity coefficient (λ) of the f-BN/PI composites with 30 wt% f-BN was 0.71 W/mK, higher than that of BN/PI composites with 30 wt% BN (λ of 0.69 W/mK). Modified Hashin-Shtrikman model demonstrated that f-BN possessed relatively lower thermal resistance with PI matrix. Meantime, the corresponding e and dielectric loss tangent (tanδ) value of the f-BN/PI composites was decreased to 3.32 and 0.004, respectively, lower than that of BN/PI composites with 30 wt% BN (e of 3.77 and tanδ of 0.007). Moreover, the corresponding heat resistance index (THRI) and glass transition temperature (Tg) of the f-BN/PI composites was further enhanced to 280.2 °C and 251.7 °C, respectively.

Subfields: Materials Chemistry, Mechanics of Materials, Polymers and Plastics

View Paper: https://www.semanticscholar.org/paper/7faa9254c66adac9bb8aff3ba9605ec3c1136ef7