Tool release: gathering 802.11n traces with channel state information

By Daniel Halperin, Wenjun Hu, Anmol Sheth, David Wetherall. CCRV, 2011

1,736 citations recorded by the source corpus.

Subfields: Computer Networks and Communications, Electrical and Electronic Engineering

View Paper: https://www.semanticscholar.org/paper/7ee59596adde55e744c0c7dc00220dc6d89d912d

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Computer Networks and Communications

1. Alex X. Liu
2. Yunhao Liu
3. Zheng Yang
4. Kun Qian
5. Chenshu Wu
6. Gang Zhou
7. Guidong Zhang
8. Yi Zhang

In Electrical and Electronic Engineering

1. Yunhao Liu
2. Zheng Yang
3. Kun Qian
4. Chenshu Wu
5. Kyle Jamieson
6. Gang Zhou
7. Jie Xiong
8. Guidong Zhang

Citations in the corpus

• Understanding and Modeling of WiFi Signal Based Human Activity Recognition (2015, methodology): “CSI Based : CSI values are available in many commercial devices such as Intel 5300 [9] and Atheros 9390 network interface cards (NICs) [19].”
• Wireless Sensing for Human Activity: A Survey (2020, methodology): “Similar to RSSI, CSI measurements can be obtained at any devices with off-the-shelf WiFi interfaces (e.g., Intel 5300 NIC [96] and Atheors 9580 NIC [97]) with modified driver.”
• SpotFi: Decimeter Level Localization Using WiFi (2015, methodology): “We use Intel 5300 WiFi chips in the current prototype because of the availability of CSI extraction software for these chips [68], but SpotFi can easily be deployed with WiFi APs that use chips from other manufacturers.”
• Phaser: enabling phased array signal processing on commodity WiFi access points (2014, background): “11 CSI readings [10], which enables us to extract per-subcarrier phase information.”
• A Survey on Behavior Recognition Using WiFi Channel State Information (2017, methodology): “In some commercial network interface cards (NICs), such as Intel NIC 5300, the CSI can be collected using the tool provided in [11].”
• HitchHike: Practical Backscatter Using Commodity WiFi (2016, methodology): “We use the firmware provided by [9] to control the rate of 802.11b packets transmission.”
• Non-Invasive Detection of Moving and Stationary Human With WiFi (2015, neutral): “Concretely, the average estimation error is 0.86 bpm for LOS scenarios and 0.97 bpm for NLOS scenarios.”
• Zero-Effort Cross-Domain Gesture Recognition with Wi-Fi (2019, methodology): “Linux CSI Tool [18] is installed on devices to log CSI measurements.”
• Dynamic-MUSIC: accurate device-free indoor localization (2016, methodology): “We install the CSI tool [11] developed by Halperin on these miniPCs to obtain the CSI information for each received packet.”
• Gait recognition using wifi signals (2016, methodology): “11n protocol as the sender and a Thinkpad X200 laptop with the Intel 5300 wireless card (of about 10 USD) as the receiver to collect CSI measurements using the Linux CSI tool [11].”
• Device-Free Human Activity Recognition Using Commercial WiFi Devices (2017, background): “Recently, CSI values provided by WiFi network interface cards (NICs) [10], [32] are widely used for human activity recognition [7], [28], [31].”
• WiFi Sensing with Channel State Information (2019, methodology): “11n CSI Tool [31] is the most widely used tool for CSI measurements.”
• RT-Fall: A Real-Time and Contactless Fall Detection System with Commodity WiFi Devices (2017, background): “H.Wang, D. Zhang, J. Ma, Y. Wang, and S. Li are with the Key Laboratory of High Confidence Software Technologies, Ministry of Education, and School of Electronics Engineering and Computer Science, Peking University, Beijing 100871, China.”