A small wideband microstrip-fed monopole antenna

By Jihak Jung, Wooyoung Choi, Jaehoon Choi. 2005

193 citations recorded by the source corpus.

Subfields: Aerospace Engineering, Electrical and Electronic Engineering

View Paper: https://www.semanticscholar.org/paper/7ebf8fb5b1e29ac6f60b332ddb5cb3548d65700d

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Aerospace Engineering

In Electrical and Electronic Engineering

Citations in the corpus

Small Square Monopole Antenna With Inverted T-Shaped Notch in the Ground Plane for UWB Application (2009, background): “In [7] and [8], two new small wideband planar monopole”
A Novel UWB Antenna With Dual Notched Bands for WiMAX and WLAN Applications (2012, background): “By cutting the two notches of suitable dimensions at the two lower corners of the patch, it is the same with [10] that”
NUMERICAL ANALYSIS OF A SMALL ULTRA WIDEBAND MICROSTRIP-FED TAP MONOPOLE ANTENNA (2006, unknown): “75, and a small size of 16 mm, which is smaller than the antennas presented in [2–14].”
Ultrawideband Band-Notched Folded Strip Monopole Antenna (2007, background): “Microstrip-fed square monopoles [12], [13] as well as circular monopoles [14] have been studied extensively in terms of their impedance bandwidth, radiation patterns and transient response.”
Small Square Monopole Antenna for UWB Applications With Variable Frequency Band-Notch Function (2009, background): “Moreover, other strategies to improve the impedance bandwidth that do not involve a modification of the geometry of the planar antenna have been investigated [7], [8].”
Novel Modified UWB Planar Monopole Antenna With Variable Frequency Band-Notch Function (2008, methodology): “For impedance bandwidth enhancement, techniques such as using a pair of notches at the lower corner of patch [2], inserting a slot in the tapered radiating element [3], using the notch structure in the ground plane [2], [3] and adding a narrow slit in one side of the monopole [4] have been reported.”
Bandwidth Enhancement of Novel Compact Single and Dual Band-Notched Printed Monopole Antenna With a Pair of L-Shaped Slots (2009, background): “Recently, many techniques have been examined to enhance the antenna bandwidth, including the use of trident-shaped feeding strip and a tapered impedance transformer [1] and embedding a pair of notches in the two lower corners of the patch and the notch structure in the upper edge of the ground plane”
A Modified Microstrip-Fed Two-Step Tapered Monopole Antenna for UWB and WLAN Applications (2007, background): “truncated ground plane acts as an impedance matching element to control the impedance bandwidth of a square monopole [ 6 ], because it helps matching the patch with the two-step feedline in a wide range of frequencies.”