Experimental characterization and analytical modelling of the mechanical behaviour of fused deposition processed parts made of ABS-M30

By D. Croccolo, M. Agostinis, G. Olmi. 2013

354 citations recorded by the source corpus.

Subfields: Automotive Engineering, Industrial and Manufacturing Engineering, Mechanical Engineering

View Paper: https://www.semanticscholar.org/paper/7581ae17635f97eb7c30fcaa8ecc42e30ff92910

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Automotive Engineering

In Industrial and Manufacturing Engineering

In Mechanical Engineering

Citations in the corpus

Failure Analysis and Mechanical Characterization of 3D Printed ABS With Respect to Layer Thickness and Orientation (2016, neutral): “accumulated stress concentration at fillet areas [2, 5, 6, 8].”
3D-Printed Carbon Fiber Reinforced Polymer Composites: A Systematic Review (2020, background): “[52] (their design includes a larger radius, 244 mm instead of 76 mm, to reduce the stress concentrations and avoid the initiation of crack).”
Effect of Infill Parameters on Tensile Mechanical Behavior in Desktop 3D Printing (2016, positive): “However, to avoid the stress concentration at transition zones of specimens head, as tested by Croccolo et al. , 24 and to leave enough space for the inﬁll geometry, the pieces were designed without a bigger clamp connection, as can be seen in Figure 4.”
FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments (2020, methodology): “When printing ABS using the FDM process, the process parameters such as infill density, orientation, layer thickness, airgaps, raster angle and width play important roles in providing better strength to the print part [51,52].”
Thermal conditions affecting heat transfer in FDM/FFE: a contribution towards the numerical modelling of the process (2015, background): “…and/or deposition rate being identified as the major parameters influencing bonding (Pandey et al. 2006, Pal and Ravi 2007, Galantucci et al. 2009, Widden and Gunn 2010, Syam et al. 2011, Boschetto et al. 2013, Croccolo et al. 2013, Cunico 2013, Rezaie et al. 2013, Gurrala and Regalla 2014b).”
Disentanglement effects on welding behaviour of polymer melts during the fused-filament-fabrication method for additive manufacturing (2017, background): “In addition, large shear rates in the nozzle deform and align the polymer microstructure prior to welding; it is suggested that this alignment can affect the diffusive behaviour at the weld line causing de-bonding [19].”
Fused Deposition Modelling of Fibre Reinforced Polymer Composites: A Parametric Review (2021, neutral): “The number of contour lines (NC) can be defined as the product of two times the number of longitudinal raster per layer (2nc), to take into account both specimen edges, and the number of layers (nl), as shown in Equation (4) [63].”