A uniform temperature heat sink for cooling of electronic devices

By Gad Hetsroni, A. Mosyak, Z. Segal, G. Ziskind. 2002

293 citations recorded by the source corpus.

Subfields: Computational Mechanics, Mechanical Engineering

View Paper: https://www.semanticscholar.org/paper/718e734e2df1e66fed163345531895b3278e818e

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Computational Mechanics

In Mechanical Engineering

Citations in the corpus

Measurements and High-Speed Visualizations of Flow Boiling of a Dielectric Fluid in a Silicon Microchannel Heat Sink † (2006, result): “The fluctuations in wall temperature and pressure drop due to flow instabilities have also been measured by other investigators (Hetsroni et al., 2002; Brutin and Tadrist, 2003; Wu and Cheng, 2004).”
A comprehensive flow regime map for microchannel flow boiling with quantitative transition criteria (2010, result): “The proposed criterion for transition between confined and unconfined flow is compared in Figure 5 with available experimental observations from other studies in the literature for water [1, 3, 7, 25-31], dielectric liquids [32-35], and refrigerants [36].”
Effect of axial conduction on the heat transfer in micro-channels (2004, background): “The experimental facility and flow loop, are described in detail in [21,22].”
Unstable and stable flow boiling in parallel microchannels and in a single microchannel (2007, background): “Recently, a great deal of attention has been given to the study of dynamic flow boiling instability in microchannels [8–17].”
Measurement and prediction of pressure drop in two-phase micro-channel heat sinks (2003, unknown): “[10].”
Measurement and correlation of critical heat flux in two-phase micro-channel heat sinks (2004, background): “These include boiling incipience [1,2], dominant flow patterns [3–5], hydrodynamic instability [6–9], heat transfer [10–14], and pressure drop [9,12,15–19].”
Flow boiling heat transfer in two-phase micro-channel heat sinks––I. Experimental investigation and assessment of correlation methods (2003, background): “The combination of small flow passage area and flow boiling produce very high heat transfer coefficients with minimal flow rate and overall coolant inventory requirements, and provide better stream-wise temperature uniformity than single-phase micro-channel heat sinks [1] [2] [3] [4] [5] [6].”
Explosive boiling of water in parallel micro-channels (2005, methodology): “Such trend of heat transfer coefficient with quality was also reported by Hetsroni et al. (2002) for a heat sink that had 21 parallel triangular micro-channels of dh = 129 lm. Vertrel XF (with a saturation temperature of 52 � C) was used as the working fluid in this study.”