A pole-zero matching method for EBG surfaces composed of a dipole FSS printed on a grounded dielectric slab

By Stefano Maci, M. Caiazzo, Alessio Cucini, Massimiliano Casaletti. IEEE Transactions on Antennas and Propagation, 2005

221 citations recorded by the source corpus.

Subfields: Aerospace Engineering, Electronic, Optical and Magnetic Materials

View Paper: https://www.semanticscholar.org/paper/6f1fd7989a6e941ed9fca1d37e17889ca61a8e21

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Aerospace Engineering

In Electronic, Optical and Magnetic Materials

Citations in the corpus

A Circularly-Polarized Isoflux Antenna Based on Anisotropic Metasurface (2012, methodology): “The pole-zero matching (PZM) method [9] is then used to interpolate the results obtained on the design-plane .”
Spiral Leaky-Wave Antennas Based on Modulated Surface Impedance (2011, methodology): “the size of the local patch and the local periodicity ,i s obtained by using the pole-zero matching method presented in [ 11 ] with the method of moments (MoM) analysis in [12].”
Metasurfing: Addressing Waves on Impenetrable Metasurfaces (2011, methodology): “Large periodicity may imply indeed transfer of energy in higher-order modes that can be effectively interpreted as loss [7].”
Non-Uniform Metasurface Luneburg Lens Antenna Design (2012, methodology): “This impedance, which depends on the local radius of the local patches, is obtained using the pole-zero matching method, presented in [17], and the Method of Moments (MoM) analysis [18].”
A Printed Leaky-Wave Antenna Based on a Sinusoidally-Modulated Reactance Surface (2011, background): “It should be noted that a pole-zero representation of as a function of and frequency has been presented in [ 17 ], which is valid for complex geometries over a wide range of frequencies and incident angles.”
Synthesis of Modulated-Metasurface Antennas With Amplitude, Phase, and Polarization Control (2016, methodology): “To this purpose, the pole-zero matching method [14] or the analytical model presented in [15] can be used.”
Electronically Steerable 1-D Fabry-Perot Leaky-Wave Antenna Employing a Tunable High Impedance Surface (2012, background): “in [38] can be expanded to take into account more optimization parameters beyond frequency in the design of 1-D LWA.”
Analysis and Optimization of Leaky-Wave Radiation at Broadside From a Class of 1-D Periodic Structures (2006, methodology): “This approach has been used in [13] to model 2-D periodic metal screens by means of lumped, wavenumber-dependent L-C networks coupling the dominant TE and TM transverse modes.”
Simple and Accurate Analytical Model of Planar Grids and High-Impedance Surfaces Comprising Metal Strips or Patches (2007, methodology): “1996. [ 22 ] S. Maci, M. Caiazzo, A. Cucini, and M. Casaletti, “A pole-zero mathcing method for EBG surfaces composed of a dipole FSS printed on a grounded dielectirc slab,” IEEE Trans.”
Anisotropic Impedance Surfaces for Linear to Circular Polarization Conversion (2012, methodology): “Among those surfaces, anisotropic designs impose a differential phase shift to the two polarizations of the incoming plane wave [29]–[34].”
An Overview of Equivalent Circuit Modeling Techniques of Frequency Selective Surfaces and Metasurfaces (2014, background): “It can be demonstrated that the expression of the FSS reactance satisfies the Foster theorem [75], that is, it possesses the same pole-zero analytical properties as a passive LC network.”