Adsorption characteristics of brilliant green dye on kaolin.

By B. Nandi, A. Goswami, M. Purkait. Journal of Hazardous Materials, 2009

655 citations recorded by the source corpus.

Subfields: Biomaterials, Spectroscopy, Water Science and Technology

View Paper: https://www.semanticscholar.org/paper/6ce34fc862f9e3c9d575efc94859dfce916164e1

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Biomaterials

1. M. C. Chattopadhyaya
2. Aiqin Wang

In Water Science and Technology

1. Aiqin Wang
2. M. C. Chattopadhyaya
3. Li Wang
4. Junping Zhang

Citations in the corpus

• Application of potato (Solanum tuberosum) plant wastes for the removal of methylene blue and malachite green dye from aqueous solution (2016, background): “(11) (Nandi et al., 2009) and (12). where m is the adsorbent dose (mg/L), C e is the equilibrium concentration (mg/L) of the dye in solution and q e m is the solid-phase concentration (mg/L) at equilibrium.”
• Adsorption of Brilliant Green dye from aqueous solution onto red clay (2013, methodology): “As a result of initial rapid adsorption and longer contact time, adsorbent surface gets saturated (macro and meso pores) that resists further adsorption of BG dye [43] because some of the repulsive forces exist between the BG dye molecules present on the solid and BG molecules present in the bulk ph”
• Fast removal of methylene blue from aqueous solution by adsorption onto chitosan-g-poly (acrylic acid)/attapulgite composite (2011, background): “Recently, clays such as montmorillonite [22–25], attapulgite [26,27], kaolin [28] and mica [29] are gaining interest for application as adsorbents in wastewater treatment due to their low cost.”
• Removal of cationic methylene blue and malachite green dyes from aqueous solution by waste materials of Daucus carota (2011, neutral): “(10) (Nandi et al., 2009) and (11). where m is the adsorbent dose (g/L), C e is the equilibrium concentration (mg/L) of the MB in solution, q e is the amount of MB adsorbed at equilibrium (mg/g) and q e m is the solid-phase concentration (mg/L) at equilibrium.”