Partition of plastic work into heat and stored energy in metals

By J. Hodowany, G. Ravichandran, Ares Rosakis, P. Rosakis. 2000

372 citations recorded by the source corpus.

Subfields: Biomedical Engineering, Materials Chemistry, Mechanics of Materials

View Paper: https://www.semanticscholar.org/paper/6cbe14dfb6017542a1196066287662da196c3123

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Biomedical Engineering

In Materials Chemistry

In Mechanics of Materials

Citations in the corpus

Experiments on heat generated during plastic deformation and stored energy for TRIP steels (2009, result): “This value is in agreement with other sources [17–19].”
Is stored energy density the primary meso-scale mechanistic driver for fatigue crack nucleation? (2018, background): “…to be determined but is often taken to be approximately 5% of total energy associated with plastic deformation, as the empirically accepted fraction of dissipated energy emerging as heat is well documented to be about 95% (Kamlah and Haupt, 1997; Hodowany et al., 2000; Rusinek and Klepaczko, 2009).”
A variational formulation of the coupled thermo-mechanical boundary-value problem for general dissipative solids (2006, methodology): “The good correspondence between the theoretical predictions and the experimental data of Hodowany et al. (2000) suggests that both a-titanium and Al2024-T are variational.”
Dynamic plasticity and fracture in high density polycrystals: constitutive modeling and numerical simulation (2005, methodology): “If data revealing evolution of b is available from physical experiments (cf. Hodowany et al., 2000; Rosakis et al., 2000), Eq.”
Thermo-Mechanical Aspects of Adiabatic Shear Failure of AM50 and Ti6Al4V Alloys (2008, result): “On the other hand, Hodowany et al. (2000) reported results pertaining to 2024-T3 aluminum alloy and α titanium showing that intβ is both strain and strain-rate dependent.”
Constitutive relations in 3-D for a wide range of strain rates and temperatures – Application to mild steels (2007, background): “…0 r n; _n nð Þ; T h i dn ð18Þ where T0 is the initial temperature, q is the density, Cp is the specific heat at constant pressure (assumed constant during numerical simulation) and b is the Taylor–Quinney coefficient which may vary with plastic deformation (Macdougall, 2000; Hodowany et al., 2000).”
Coupled phase-field and plasticity modeling of geological materials: From brittle fracture to ductile flow (2018, background): “Also, experimental results have shown that the coefficient can evolve by the deformation and its rate [100].”
Dynamic shear bands: an investigation using high speed optical and infrared diagnostics (2001, background): “…using the IR camera on the facing side of the specimen. et al., 1987; Marchand and Duy, 1988; Zehnder and Rosakis, 1991, 1992; Mason and Rosakis, 1993; Zehnder et al., 1993; Kallivayalil and Zehnder , 1994; Zhou et al., 1996a; Guduru et al., 1998; Li and Lambros, 2000; Hodowany et al., 2000).”