Effect of friction stir welding parameters on the microstructure and mechanical properties of the dissimilar Al-Cu joints
By P. Xue, D. Ni, D. Wang, Boqi Xiao, Zongyi Ma. 2011
413 citations recorded by the source corpus.
Subfields: Aerospace Engineering, Mechanical Engineering
View Paper: https://www.semanticscholar.org/paper/614f294b6effa4f80ac636bcf6d201d7b11ae23a
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Aerospace Engineering
In Mechanical Engineering
Citations in the corpus
- Microstructural evolution and mechanical properties of dissimilar Al–Cu joints produced by friction stir welding (2013, background): “that sound joints were achieved when Cu was fixed at the advancing side (AS) [25,31,32].”
- Effects of Tilt Angle on the Properties of Dissimilar Friction Stir Welding Copper to Aluminum (2016, background): “But recently, it was reported that the defect free sound Cu–Al FSW joint can be obtained by offsetting the tool toward the aluminum side under lower heat input conditions [5–10] when copper is fixed at the advancing side and aluminum is fixed at the retreating side [7, 8, 11, 12].”
- Studies on Friction Stir Welding of AA 2024 and AA 6061 Dissimilar Metals (2014, background): “Better mechanical properties are obtained when harder material is placed on the advancing side and softer material in retreating side [5,7].”
- A Review on Dissimilar Friction Stir Welding of Copper to Aluminum: Process, Properties, and Variants (2016, neutral): “8 mm RS: 600 rpm WS: 100 mm=min TPO: 2 mm IMCs: CuAl2, Cu9Al4 UTS: 110 MPa JE: 91% YS: 90 MPa EL: 13% Hardness: 100 HV (top), 110 HV (middle),120 HV (bottom) [42, 43]”