Pore solution in alkali-activated slag cement pastes. Relation to the composition and structure of calcium silicate hydrate

369 citations recorded by the source corpus.

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

Hydration and properties of sodium sulfate activated slag (2013, result): “Previous studies by other researchers have also detected CSH as the main reaction product of AAS [28, 40, 43, 44, 60-66].”
Effects of activator characteristics on the reaction product formation in slag binders activated using alkali silicate powder and NaOH (2012, background): “Some amount of Q silicates in addition to Q silicates have been reported in the C–S–H formed in waterglass and NaOH activated slag systems [32,36].”
Chloride transport and the resulting corrosion of steel bars in alkali activated slag concretes (2016, methodology): “[2] report that the concentration of Nawas 60,000 ppm in the AAS paste at the age of 3 h when WG with Na2O % of 4 was used).”
Very early-age reaction kinetics and microstructural development in alkali-activated slag (2015, background): “The former is dense compared to the latter, which is more porous and prone to cracking [40,41].”
Polycarboxylate superplasticiser admixtures: effect on hydration, microstructure and rheological behaviour in cement pastes (2005, background): “The position of this band is associated with the degree of condensation of the tetrahedral silicate chains and the Ca/Si of the C–S–H gel.(22) The lower the shift of this band towards higher frequencies, the greater is the condensation and lower the Ca/Si ratio in the gel.”