Latency Critical IoT Applications in 5G: Perspective on the Design of Radio Interface and Network Architecture

By Philipp Schulz, Maximilian Matthé, Henrik Klessig, M. Simsek, Gerhard P. Fettweis, J. Ansari, S. Ashraf, B. Almeroth, J. Voigt, I. Riedel and 5 more. IEEE Communications Magazine, 2017

758 citations recorded by the source corpus.

Subfields: Computer Networks and Communications, Electrical and Electronic Engineering, Media Technology

View Paper: https://www.semanticscholar.org/paper/5b8377c228761d0ae926821ac390fff31cb119c2

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Computer Networks and Communications

In Electrical and Electronic Engineering

In Media Technology

Citations in the corpus

Ultra-Reliable Low Latency Cellular Networks: Use Cases, Challenges and Approaches (2017, methodology): “As shown by the experiment conducted in [8], at least 39 ms is needed to contact the core network gateway, which connects the LTE system to the Internet, while a minimum of 44 ms is required to receive a response from the GooFigure 1.”
Survey on Multi-Access Edge Computing for Internet of Things Realization (2018, background): “For instance factory automation applications may typically require a reliability of 10−9 packet loss rate and a latency range of 250 μs to 10 ms [3].”
Ultra-Reliable and Low-Latency Communications in 5G Downlink: Physical Layer Aspects (2017, methodology): “Over the years, there have been some trials to support machine-type communications such as5 NB-IoT in licensed band, SigFox and LoRa in unlicensed band [9].”
A Survey on Low Latency Towards 5G: RAN, Core Network and Caching Solutions (2017, background): “In this case, system response times should be less than a few milliseconds including network delays [22], [26], [27].”
Survey on Network Slicing for Internet of Things Realization in 5G Networks (2021, background): “10 − 9 packet loss rate and E2E latency range of 250 µ s to 10 ms are required factory automation applications [20].”
Industrial Communication Systems and Their Future Challenges: Next-Generation Ethernet, IIoT, and 5G (2019, background): “The first 5G release, particularly the URLLC, already contains specific features at both the radio interface and the network architecture to enable shorter latency and higher reliability [181], [182], aiming at supporting critical industrial applications whose performance requirements are beyond cur”
A Statistical Learning Approach to Ultra-Reliable Low Latency Communication (2018, background): “ULTRA-reliable low latency communication (URLLC) is among the most exciting novelties in 5G networks [1]– [4].”
Toward Edge Intelligence: Multiaccess Edge Computing for 5G and Internet of Things (2020, background): “The E2E latency required in a factory automation application should be between 0.25 and 10 ms according to [91].”
Ultra-Low Latency (ULL) Networks: The IEEE TSN and IETF DetNet Standards and Related 5G ULL Research (2018, background): “In particular, the emerging tactile Internet paradigm with end-to-end target latencies below 1 ms is tightly coupled to the ongoing 5G developments [5], [13]–[16].”
A Tutorial on Ultrareliable and Low-Latency Communications in 6G: Integrating Domain Knowledge Into Deep Learning (2021, background): “Table 1 KPIs and Research Challenges of Different URLLC Applications [2], [28], [31], [33]–[41]”