Co-production of hydrogen and carbon nanotubes from real-world waste plastics: Influence of catalyst composition and operational parameters

By Dingding Yao, Yeshui Zhang, Paul T. Williams, Haiping Yang, Hanping Chen. 2018

301 citations recorded by the source corpus.

Abstract The use of Ni-Fe catalysts for the catalytic pyrolysis of real-world waste plastics to produce hydrogen and high value carbon nanotubes (CNT), and the influence of catalyst composition and support materials has been investigated. Experiments were conducted in a two stage fixed bed reactor, where plastics were pyrolysed in the first stage followed by reaction of the evolved volatiles over the catalyst in the second stage. Different catalyst temperatures (700, 800, 900 °C) and steam to plastic ratios (0, 0.3, 1, 2.6) were explored to optimize the product hydrogen and the yield of carbon nanotubes deposited on the catalyst. The results showed that the growth of carbon nanotubes and hydrogen were highly dependent on the catalyst type and the operational parameters. Fe/γ-Al2O3 produced the highest hydrogen yield (22.9 mmol H2/gplastic) and carbon nanotubes yield (195 mg g−1plastic) among the monometallic catalysts, followed by Fe/α-Al2O3, Ni/γ-Al2O3 and Ni/α-Al2O3. The bimetallic Ni-Fe catalyst showed higher catalytic activity in relation to H2 yield than the monometallic Ni or Fe catalysts because of the optimum interaction between metal and support. Further investigation of the influence of steam input and catalyst temperature on product yields found that the optimum simultaneous production of CNTs (287 mg g−1plastic) and hydrogen production (31.8 mmol H2/gplastic) were obtained at 800 °C in the absence of steam and in the presence of the bimetallic Ni-Fe/γ-Al2O3 catalyst.

Subfields: Biomedical Engineering, Materials Chemistry

View Paper: https://www.semanticscholar.org/paper/59651cb650df42b544eaf5a88af612bddb7fde9d

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Biomedical Engineering

1. Paul T. Williams
2. Dingding Yao
3. Haiping Yang
4. Hanping Chen
5. Chunfei Wu

In Materials Chemistry

1. Dingding Yao
2. Haiping Yang
3. Hanping Chen
4. Yingquan Chen
5. Q. Hu
6. Paul T. Williams

Citations in the corpus

• Carbon nanotubes from post-consumer waste plastics: Investigations into catalyst metal and support material characteristics (2021, methodology): “In our previous study using the same reactor [27], the maximum carbon deposition yield of 40.”