Mechanism of geopolymerization and factors influencing its development: a review
By D. Khale, R. Chaudhary. 2007
1,447 citations recorded by the source corpus.
Subfields: Civil and Structural Engineering, Environmental Engineering
View Paper: https://www.semanticscholar.org/paper/5827ff120aff6c535dad4efad48989dee04b615a
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Civil and Structural Engineering
- P. Sarker
- Navid Ranjbar
- P. Nath
- S. Barbhuiya
- P. Deb
- A. Palomo
- I. García-Lodeiro
- A. Fernández-Jiménez
In Environmental Engineering
Citations in the corpus
- The development of compressive strength of ground granulated blast furnace slag-palm oil fuel ash-fly ash based geopolymer mortar (2014, background): “So it is observed that Ca and Al2O3 influenced the compressive strength of the mortar [6,16].”
- Effects of nano-silica on the strength development of geopolymer cured at room temperature (2015, background): “The reactive silica involves in the formation of aluminosilicate gel resulting in a higher mechanical strength of the product [13].”
- One-part alkali-activated materials : a review (2018, background): “5, but if waste precursors are used, this range might not apply [50].”
- Composition and technological properties of geopolymers based on metakaolin and red mud (2013, background): “Cements owe their mechanical properties to the formation of the hydrated calcium silicates (C-S-H) while the exothermic reaction of geopolymerisation generates a structure closer to zeolites or aluminosilicate gels [18].”
- Sorptivity and acid resistance of ambient-cured geopolymer mortars containing nano-silica (2016, background): “This is because of the numerous benefits of 31 geopolymers over traditional cement binder such as lower CO2 emission [1], requirement for 32 less processing of the raw materials [2] and development of desired strength and structural 33”
- Zeta potential, gel formation and compressive strength of low calcium fly ash geopolymers (2015, background): “Thus, an added benefit is to convert a waste product into a useful by-product, conserving landfills and storage lagoons [16].”