Control and Power Management of Converter Fed Microgrids

By Charles Sao, Peter W. Lehn. IEEE Transactions on Power Systems, 2008

522 citations recorded by the source corpus.

Subfields: Control and Systems Engineering, Electrical and Electronic Engineering, Energy Engineering and Power Technology

View Paper: https://www.semanticscholar.org/paper/55f1eebf3b48c0f56a1fdcae55a1ef1faac82408

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Control and Systems Engineering

In Electrical and Electronic Engineering

In Energy Engineering and Power Technology

Citations in the corpus

Power Flow Stabilization and Control of Microgrid with Wind Generation by Superconducting Magnetic Energy Storage (2011, background): “Major advantages of the three-level dc/dc chopper topologies compared to traditional two-level ones [19], [20] include reduction of voltage stress of each IGBT by half, permitting to increase the chopper power ratings while maintaining high dynamic performance and decreasing the harmonics distortion”
State of the Art in Research on Microgrids: A Review (2015, background): “In [272], a control strategy in a VSC fed microgrid is proposed where multiple voltage-power droop/frequency-reactive power boost controllers jointly regulate the microgrid voltage by drooping the voltage reference of each controller against its real power output.”
Hierarchical Structure of Microgrids Control System (2012, methodology): “Similar to the adjustable load sharing method, the VPD/FQB technique can be modified to adjust the controller time constant without causing voltage and frequency deviation [47], [48].”
Power Management of Inverter Interfaced Autonomous Microgrid Based on Virtual Frequency-Voltage Frame (2011, methodology): “Direct output current control of each DG is usually employed in grid-connected operation [4]‐[ 7 ].”
Overview of Power Management Strategies of Hybrid AC/DC Microgrid (2015, methodology): “Moreover, in grid-connected operation mode (both in dispatched and undispatched power mode), the microgrid can be used for the grid support (for example, grid voltage and frequency regulations) by controlling active and reactive powers delivered to the grid [36], [37].”
Control Techniques in AC, DC, and Hybrid AC–DC Microgrid: A Review (2018, background): “1) Voltage-Real Power Droop (VPD)/Frequency-Reactive Power Boost (FQB) Droop Control: The VPD/FQB droop control proposed in [37] can be applied to lowvoltage resistive distribution lines.”
Power Control and Management in a Hybrid AC/DC Microgrid (2014, methodology): “While the hybrid ac/dc microgrid is connected to the main utility grid, DG sources in the ac microgrid are expected to either generate a specified real/reactive power, or act as terminal voltage regulator with a specified amount of active power and variable reactive power [5].”
Foundations and Challenges of Low-Inertia Systems (Invited Paper) (2018, background): “Two common modes that are usually distinguished are the grid-forming mode and the grid-following or grid-feeding mode [117]–[120].”
Optimal Allocation and Economic Analysis of Energy Storage System in Microgrids (2011, background): “M ICROGRID (MG) is widely accepted and quickly proliferated in the utility power industry for its environmental and economical benefits [1]–[4].”