Material Characterization of Fused Deposition Modeling (FDM) ABS by Designed Experiments

By M. Montero, Shad Roundy, D. Odell, Sung-hoon Ahn, Paul K. Wright. 2001

181 citations recorded by the source corpus.

View Paper: https://www.semanticscholar.org/paper/5147d5b13d9900c76c8ce64f701701005b24d7a3

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

1. Arup Dey
2. Jean-Pierre Kruth
3. Nita Yodo
4. G. Levy
5. Mohammed Algarni
6. Sami Ghazali
7. R. Schindel
8. J. Gardan

Citations in the corpus

• Smart materials in additive manufacturing: state of the art and trends (2018, background): “parameters on the quality of parts realised by FDM has been tackled in many researches (Bellini and Güçeri 2003; Lee, Dunn, and Wu 2005; Montero et al. 2001)”
• A Review of Metal Additive Manufacturing Technologies (2018, background): “For this reason, many researchers focus on studying the mechanical and thermal properties of AM metal parts [16-20].”
• A Systematic Survey of FDM Process Parameter Optimization and Their Influence on Part Characteristics (2019, methodology): “In many papers, different statistical tools such as full factorial design [10,24], fractional factorial 202 design [22,25], and face-centered central composite design (FCCCD) [13,50] were used to gain 203 maximum information from a smaller number of experiments.”
• RAPID MANUFACTURING AND RAPID TOOLING WITH LAYER MANUFACTURING (LM) TECHNOLOGIES, STATE OF THE ART AND FUTURE PERSPECTIVES (2003, background): “They demonstrate the strong anisotropy behaviour of the parts and propose designer rules applicable only for simple parts [88].”
• Effects of Raster Orientation, Infill Rate and Infill Pattern on the Mechanical Properties of 3D Printed Materials (2017, background): “[13] experimentally characterized anisotropic properties of FDM produced parts by examining five printing process parameters, among which raster orientation and air gap had significant effects on tensile strength as compared to raster width, filament color and processing temperature.”
• Comparative Study of the Sensitivity of PLA, ABS, PEEK, and PETG’s Mechanical Properties to FDM Printing Process Parameters (2021, background): “The effects of air gap on mechanical properties of PLA parts can be low [72], while it can be relevant in ABS parts [73].”
• Experimental characterization of the mechanical properties of 3D-printed ABS and polycarbonate parts (2017, methodology): “…the build and raster orientations the specimens were printed (Bellini & Güçeri 2003; Giannatsis et al. 2012; Hill & Haghi 2014; Tymrak et al. 2014; Wittbrodt & Pearce 2015; Torrado Perez et al. 2014; Torrado et al. 2015; Es-Said et al. 2007; Ahn et al. 2003; Ahn et al. 2002; Montero et al. 2001).”
• Effect of Infill Parameters on Tensile Mechanical Behavior in Desktop 3D Printing (2016, unknown): “22 Ahn et al. studied this anisotropic behavior taking into account variables from the different classifications, analyzing the tensile and compressive strength.”