Observations on chip formation and acoustic emission in machining Ti–6Al–4V alloy

By J. Barry, Gerry Byrne, D. Lennon. 2001

300 citations recorded by the source corpus.

Subfields: Mechanical Engineering, Metals and Alloys

View Paper: https://www.semanticscholar.org/paper/4dd3d05078e20dce42b5061e5a950d974f352680

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Mechanical Engineering

1. Guy Littlefair
2. A. Pramanik
3. Mathew S. Dargusch
4. S. Sun
5. Milan Brandt
6. X. Jin
7. Tao Guo
8. Xiaoyong Yang

Citations in the corpus

• Characteristics of cutting forces and chip formation in machining of titanium alloys (2009, background): “Segmented chip formation is believed to be due to either the growth of cracks from the outer surface of the chip [5,6] or adiabatic shear band formation which is caused by the localized shear deformation resulting from the predominance of thermal softening over strain hardening [7,8].”
• Machining of Titanium Alloy (Ti-6Al-4V)—Theory to Application (2015, background): “The transition in the crystal structure presumably results primarily from the pressure and temperature increase which accompanies plastic deformation (Barry et al., 2001; Bayoumi and Xie, 1995).”
• A comparative study of the cutting forces in high speed machining of Ti–6Al–4V and Inconel 718 with a round cutting edge tool (2009, unknown): “…majority of the published literature focuses on either Ti–6Al–4V (Su et al., 2006; Molinari et al., 2002; Baker et al., 2002; Komanduri and Hou, 2002; Barry et al., 2001; Bayoumi and Xie, 1995) or Inconel 718 (Nalbant et al., 2007; Ezugwu et al., 2005; Dudzinski and Devillez, 2004; Coelho et al.,…”
• Finite element simulation of high-speed machining of titanium alloy (Ti–6Al–4V) based on ductile failure model (2011, background): “In agreement with the consensus, experiment studies showed that shear localization in machining titanium alloys is due to the occurrence of thermo-plastic instability, in addition, the underside of saw-tooth segments formed at relatively high cutting speeds, exhibiting evidence of ductile fracture [”