Enhanced tensile ductility and toughness in nanostructured Cu

By Yinmin M Wang, Evan Ma, Mingwei Chen. 2002

256 citations recorded by the source corpus.

Subfields: Materials Chemistry, Mechanical Engineering, Mechanics of Materials

View Paper: https://www.semanticscholar.org/paper/4aac51df0f7f419e0c7915b931f457e4a61ea7a9

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Materials Chemistry

1. Yuntian Zhu
2. I. Ovid’ko
3. R. Valiev
4. Robert J. Asaro
5. Chang Q. Sun
6. Subra Suresh
7. V. Lubarda
8. Xiaolei Wu

In Mechanical Engineering

1. Yuntian Zhu
2. I. Ovid’ko
3. R. Valiev
4. Robert J. Asaro
5. Chang Q. Sun
6. Subra Suresh
7. V. Lubarda
8. Terence G. Langdon

In Mechanics of Materials

1. Yuntian Zhu
2. I. Ovid’ko
3. R. Valiev
4. Robert J. Asaro
5. Chang Q. Sun
6. V. Lubarda
7. Subra Suresh
8. Terence G. Langdon

Citations in the corpus

• Mechanistic models for the activation volume and rate sensitivity in metals with nanocrystalline grains and nano-scale twins (2005, background): “The different color symbols denote data from different sources [11,12,15–22].”
• Review on superior strength and enhanced ductility of metallic nanomaterials (2018, background): “53 also illustrates the tensile curve obtained at 77 K for this material (curve E) with yield stress of 700 MPa, which is considerably higher than the value typical for RT [372].”
• Amorphization of TiNi induced by high-pressure torsion (2004, background): “…materials with superior mechanical properties, such as high strength and good ductility, superplasticity at high strain rate and low temperatures, high toughness and high wear resistance (Alexandrov et al. 1998, Jiang et al. 2000, Valiev et al. 2000, 2002, Jia et al. 2001, Wang et al. 2002).”
• Thermo-mechanical behavior of low-dimensional systems: The local bond average approach (2009, unknown): “For Si and SiC nanowires of several 10 s nm in diameter, such plasticity with 150% elongation has also been observed [386,387].”
• Mechanics of Solids and Materials (2006, background): “Available data from Gertsman et al. (1994), Sanders et al. (1997), Legros et al. (2000), Wang et al. (2002), Valiev et al. (2002), Champion et al. (2003), Youssef et al. (2004), and Lu et al. (2004) on the dependence of flow stress on grain size for polycrystalline Cu, over a range from nanometers…”
• Size dependence of nanostructures: Impact of bond order deficiency (2007, background): “The ductility of metallic nanowires such as Cu is w50 times higher than that of the bulk counterparts [8,33,34].”